YouSub
Untitled

en English

Untitled English subtitles

0 downloads · 397 lines · added Jul 28, 2015

Report a problem
What's wrong?
Advertisement

English transcript

Welcome to this non-linear vibration course. And today we will study about this module
3 and lecture 1 of this course. So, in this non-linear vibration previously, we have studied
2 modules in which in the first module I have given the introduction about his non-linear
vibration; and in the second module I told you about how to derive the equation motion
for these non-linear systems.
So, in those cases, we have studied many different types of equations. For example, we have studied
this Duffing equation.
So, where the equation can be written in this form that is, x double dot plus omega n square
x plus 2 zeta omega n x dot plus alpha x cube equal to epsilon f cos omega t, where this
x is the response of the system, f the forcing function amplitude of the forcing, and omega
the frequency of the forcing function. Here, alpha x cube the non-linear term added to
the linear equation x double dot plus omega n square x plus 2 theta omega n x dot equal
to epsilon f cos omega t. So, due to this presence of this non-linear term alpha x cube
so, the system behavior will be non-linear. Also, we have briefly studied what will be
the difference between these linear system and non-linear systems.
Similarly, in case of the van der pol’s equation, the equation can be written in this
form that is x double plus x equal to mu into 1 minus x square into x dot; and hill’s
equation x double dot plus p t x equal to 0; and Mathieu equation x double dot plus
delta plus 2 epsilon cos 2 t equal to t into x equal to 0. So particularly in this case
of hill’s equation and Mathieu equation, one can find a term or parameter which is
coefficient of x. So, in this case p t x is the coefficient of x and in the second case,
in case of the Mathieu hill Mathieu equation, this delta plus 2 epsilon cos omega t is coefficient
of x. But particularly, this 2 epsilon into cos 2 t term which is a time varying term
is coefficient of x.
So, unlike in the first equation that is the Mathieu equation or the van der pol equation
here a time varying term is a parameter which is coefficient of x that is why these 2 equations
are parametrically exited system. And the other systems are either it can be a force
type equation or it can be a free vibration equation, depending on the forcing term used
in this equation.
So, in this particular module today class we will study, what is a solution or equilibrium
point, types of equilibrium points, representation of the solution, how solution of a linear
system and non-linear system differs, how to determine the solutions. So, already we
know for the different types of equation the response of equations we can find. So, to
find equation solution of those equations so, we can have two different types of solution
or 2 different parts of the solution. So, one is the transient part of the solution
and other one is the steady state part of the solution. So, at tends to infinity that
is time tends to infinity the solution part which we obtained from the governing equation
is the steady state part of the solution and before the steady state the response what
we got are the transient part of the solution. So, to know what is the equilibrium point.
So, in case of the equilibrium point or steady state as this system is not or the governing
equation of the system one can find. So, in these equations for example, in case of the
Duffing equation, at steady state, no longer it will be a function of time.
So, the velocity term and the acceleration term if you neglect and the remaining things
if you can find so, that will give you the equilibrium points of the system. So, for
equilibrium points of the system we can put the terms the time burying terms to be 0 and
we can find the steady state solution or the equilibrium solution of the system. So, after
getting the equilibrium solution of the system, we can find what type of equilibrium points
we obtained. So, there are mainly four different types of equilibrium points what we are going
to study. So, they are fixed point response, periodic response.
So, this response can be. So, in types one can have this fixed point response then, one
can have this periodic response and one can have quasi periodic response or one can have chaotic response of the system.
For example, let us take a base excited cantilever beam. So, in this cantilever beam, in this
base exited cantilever beam so, let it is base is moving in this direction. So, if the
base is moving in this direction in this case the beam may vibrate in these directions or
it may vibrate in a transverse direction. So, if the vibration takes place, the vibration
what we are going to see may be either it may be a trivial vibration, trivial state
or nontrivial state vibration. So, in case of trivial state or let us take the system,
in which the beam is vibrating in this direction up and down. So, in this case the as the base
is when the base is moving up and down for some frequency and amplitude of this base
motion, the beam will move in transverse direction and it may come to this position.
So, this transverse displacement can be found out and the body will be or some frequency
and some frequency and amplitude it will oscillate about this point. So, that will be nontrivial
state of vibration and if it is only vibration about its own axis so, it will be a trivial
vibration. That means the response is 0. So, for the response to be 0 the vibration will
be trivial state vibration and when it is moving to a particular distance and vibrate
at that point so, that will be nontrivial state of response. So, in case of the trivial
or nontrivial state of response, the magnitude if it is fixed, then it will be a fixed point
response and if it varies periodically, then it will be a periodic response and if it vary
in a quasi periodic manner the response will be quasi periodic and the response may be
chaotic also, to know about this periodic or quasi periodic response.
For example, in case of the periodic response so, let us take the simple linear equation
m x double dot plus k x equal to 0. So, in this case the equation can be written in this
form also x double dot plus omega n square x equal to 0. So, this is for a linear case
and it is response and it is response x can be written as a cos omega t plus phi. So,
where ‘a’ is the amplitude and this omega so, this will be omega n, omega n t plus phi
this is ‘a’ and phi can be obtained from the initial conditions. So, this response
is a periodic function. So, the response will be. So, if one plot this x versus t in this
case. So, it will burry sinusoidally and the response is periodic. Similarly, in case of
this equation m x double dot plus k x plus c x dot equal to f sin omega t so, in this
case we have 2 different type of 2 different parts of the response, one is the steady state
part and other one is the transient part.
So, the transient part one can obtain by substituting this equal to 0 and for the steady state part
so, we know the response can be obtained from this equation. So, x will be equal to for
the steady state this amplitude x the solution x can be written as x sin so, it will be x
sin omega t and in this case this x the amplitude x can be written as this f by k root over
1 minus r square whole square plus 2 zeta r whole square where, r equal to omega by.
So, r equal to this omega by omega n. So, here the steady state response is also periodic.
So, if instead of taking a single force single component of the force, if one can take multiple
component of the force for example, in case of the in case of let us take the case of
Duffing equation.
So, in which we can write the equation x double dot plus omega n square x plus 2 zeta omega
x dot plus alpha x cube. So, here I can take the equation, if I am taking a first equation
I can write this equation in this form. So, this is for a single frequency excitation.
And for multi frequency excitation, I can put cos omega 2 t. Or I can add similar terms
to this equation to make it 2 frequency, 3 frequency or multi frequency excitation terms.
So, in all these cases the response may be periodic or quasi periodic or chaotic depending
on the type of response or type of resonance we are going to consider in this system. So,
in case of non-linear system we can get the response either to the steady state response
or equilibrium response can either be fixed point periodic, quasi periodic or chaotic
depending on the resonance conditions or depending on the control parameters what we are going
to study for the system. So, after knowing about the types of equilibrium point so, we
should know how to represent the solutions. So, we can either make a qualitative analysis
or quantitative analysis for finding the solutions, how to determine the solution. So, we can
go for a qualitative method or we can go for a quantitative method for finding the solution.
And to represent the solution either we can represent it by the we can have a time response
curve or we may go for this phase portrait or we can plot this Poincare section of the
system Poincare section of the system to represent the solution of a system.
So, one can go for the frequency response also. So, one can represent also using this
frequency response curve of the system. So, in case of the time response one can plot
the response of the system with time and in case of a single periodic or 2 periodic or
quasi periodic or chaotic response, the time response will be different from one equilibrium
point to the other equilibrium points. So, in case of the phase portrait we can represent
the system in terms of, let x is the response of the system then x dot is the velocity of
system.
So, we can represent in a phase portrait by plotting this x versus x dot. So, in case
of the Poincare section we sample out the response, time response at particular interval
of times and taking those points we can plot the Poincare section of the system. Also,
we can go for a frequency response or force response of the system to represent the solution
of the system. And already we know how the solution of a linear and non-linear system
differs.
So, there are several point in case of the solution of a linear and non-linear systems.
So, in case of a linear system we get we obtain unique solution but in case of a non-linear
system the solution is not unique and we can get multiple solutions in case of the non-linear
case. Also in case of the non-linear system one
obtain a wide range of solutions depending on the order and type of non-linearity and
also depending on the type of resonance conditions. Hence, it is very difficult to obtain exact
close form solution and hence, one go for solving these equations by applying approximate
perturbations or other different type of numerical methods. So, by using different numerical
methods like Runge-Kutta method or different approximates solution perturbation methods
one can use to solve these equations.
So, initially we will study qualitative and then, we can go for quantitative methods to
study this solution of the non-linear systems. After finding the solution of the non-linear
system our work is to check whether the solutions what you obtained are stable or unstable.
So, one should go for a stability analysis after finding the response of the system.
So, after finding the solutions, we can go for stability analysis or and bifurcation
analysis of the system and we can study completely the system response, by studying the equilibrium
points and their corresponding stability. So initially, we will now study about the
qualitatively the non-linear equations and then, we will go for quantitative analysis
of these cases.
So, let us see this qualitative analysis of this non-linear system. So, let us take a
conservative system where, I can write the equation in this form that is, u double dot
plus f u equal to 0. So, for example, in case of this equation so, this equation I can write
in this form also, that is, u double dot plus omega n square u plus 2 zeta omega n u dot
plus alpha u cube equal to f 1 cos omega 1 t plus f 2 cos omega 2 t or u double dot plus
f u equal to 0. So, where in this case f u equal to f 1 cos omega 1 t plus f 2 cos omega
2 t minus this omega n square u minus 2 zeta omega n u dot minus alpha u cube. So, one
can write all these equations in a form u double dot plus f u equal to 0. Now, multiplying
u dot in this equation so, I can write this equation in this form u dot into u double
dot plus u dot into f u equal to 0.
And up on integrating this thing one can write this equation equal to integration of u dot
u double dot plus u dot f u d t equal to h. So, where, h is a constant and integrating
this u u double dot so, one can find this half u dot square plus f u so, half u dot
square plus F u equal to h or one can find this f u equal to where this F u equal to
f integration of f u d u. So, from this equation one can see that this term correspond to the
kinetic energy of the system and this term correspond to the potential energy of the
system.
So, kinetic energy plus potential energy of the system is constant that is equal to h.
So, for a given value of x that is the potential energy or that is the total energy of the
system. So, if one knows this potential function or potential energy of the system so, one
can find what is the velocity of the system? So, this velocity term so, one can write this
velocity v equal to u dot equal to 2 into h minus f u so, v equal to u dot equal to.
So, one can multiply this 2 here. So, it will be u dot square plus 2 f u equal to 2 h or
u dot square will be equal to 2 h minus f u 2 h minus 2 into h minus f u and then v
equal to u dot will be square root of this.
So, after getting this one can. So, v equal to. So, I can write this v that is u dot equal
to root over 2 into h minus F u. So, for a given value of h and knowing this potential
function of a system, we can find what is u dot of the system. For example, let us take
a system let us take a system where, this potential function is represented by this
curve. So, let me take so, this is f u, this equation I can write in this form. So, this
is f u versus let it is u. Already I told you one can find this f u by integrating.
So, integrating f u d u and we know this velocity v that is equal to u dot equal to root over
2 into h minus f u. For example, in case of the spring mass system I can write this equation
in this form u double dot plus u double dot plus omega n square u so, u double dot plus
omega n square u equal to 0 or if there is some forcing then, I can put it f cos omega
t or f sine omega t then, u double dot plus f u equal to 0. So, in this f u will be equal
to. So, f u equal to omega n square u and this capital F u will be integration of this
omega n square u d u. So, this can be written as omega n square. So, this will becomes so,
u square by 2. So, in this way one can find this f u. So, after getting this f u 1 can
substitute it in this equation of velocity that is u dot and find what will be the velocity
for a given value of u.
So, let us take this point, the minimum point in this potential curve so, corresponding
to this curve. That means, these let us take h equal to so, this is h. So, after getting
this h so, let it corresponds to this line correspond to the total energy. So, add this
point h equal to f u so, if h equal to f u so, in that case b will be equal to 0.
So, if I will plot this u dot versus u so, corresponding to this I will have 0 responses.
That means, the velocity and displacement both are 0 in this case. So, let me take a
line here so, this is h 0 so, this point correspond to u 0. And if I will take another point h
1 here so, corresponding to this point so, let us take a point here. So, in this case so, up to this f u equal to 0.
So, we have this h 1. So, one can have two different. So, this is h 1 and this is f u
so, corresponding to this point so, this will be equal to 0.
Similarly, corresponding to this point this will be the velocity will be equal to 0. So,
this velocity equal to 0 and this point velocity equal to 0. See, if I will take any other
point away from this. So, let me take a point here. So, if I will take a point here so,
corresponding to this as this h is greater than this f u so, this term will be real positive
term and the root over can give 2 solutions of this thing, two solutions and one will
be. So, it will be plus minus. So, let this value this h minus F u as it is positive so,
I can have two value of this corresponding to this and that will be 2 into h minus F
u. And we will have 2 real values so, those 2 real values. So, one value I can put it
here and other value will be here.
Similarly, corresponding to this point, I will have similarly two more values and if
I will go on finding the velocity corresponding to different values of, different values corresponding
to this line so, I can have a curve. So, I will two values corresponding to each point
and I will have a close curve corresponding to this. So, this close curve represents the
trajectory corresponding to h 1. So, corresponding to total energy h 1, one can find the trajectory
T 1 which represents the flow or trajectory of u versus u dot.
Similarly, corresponding to another total energy h 2 so, one can find corresponding
to this point it will have 0 and corresponding to this point again one have 0. And similarly
by proceeding in the similar way so, one can find the trajectory. So, again one can get
a close trajectory corresponding to this. So, this trajectory T 2 correspond to this
total energy h 2. But, if I take another system in which the potential function system is
represented by this, let me take it.
So, in this case so, this is F u and this is u. So, corresponding to this, I can qualitatively
analyze the flow or trajectory of the system. So, let me take a point so, this is h 1. So,
corresponding to the point where, h 1 and F u have the same value so, our V which is
equal to u dot equal to root over 2 into h minus F u h minus F u. So, corresponding to
this point we can have we can have so, this is V and this is u. So, let us take this point. So, corresponding
to this point we can have 0 velocities. Similarly, corresponding to this point we can have a
0 velocity.
So, here the displacement and slope displacement and the velocity both are 0 corresponding
to these 2 points. So, if I will take a point before this where, this F u is less than h
that is the total energy. So, this part I can get 2 real roots. But, if I will take
a point so, let corresponding to this u if I will take this point. So, in this point
this F u is greater than h so, inside term is negative. So, square root of this negative
term will leads to imaginary terms. So, I can have. So, corresponding to a term before
this I can have the flow, I can have the flow like this or if I will take some other line
that is h 0 so, corresponding to that I can another point also. So, this is the trajectory
before this and after this also we can have the trajectory like this. And corresponding
to this maximum point so, let us take this maximum point. So, corresponding to this maximum
point so, h and F u when h and F u value are same so, we can have this point. But before
that and after that we can correspond to this, I can put value like this and at this point
we will have 0 solution that means, V and u equal to 0 and before that as h is greater
than F u. So, we have 2 values of this. But, if you
look at the flow so, one can see that the flow is separated at this point. So, this
flow so, it will come in this direction and it will come away along this curve similarly,
the flow will be like this. So, at this point the flow moves in this direction or before
that it moves in this direction. So, that means, the solution is separated by these
two and they are known as separatrix of this solution. And if I will take a value of h
which is greater than this so, I can have the flow like this so, I can have this flow
corresponding to this. Similarly, before th
…

Need subtitles from another video?