Advertisement
English transcript
Detection of Adulteration in Milk Adulteration in milk considerably reduces
the quality of milk. Soap, acid, starch, table sugar and chemicals like formalin are some
of the adulterants added to milk. Most of the chemicals used as adulterants are poisonous
and can cause health hazards. Here are some tests to find out some of the
common adulterants in milk. Materials Required
Milk Methylene blue
Test tubes Water bath
Concentrated HCl Resorcinol
Iodine solution Concentrated Sulphuric acid
0.5% Ferric Chloride solution Phenolphthalein indicator
Hot water 2% Sodium hydroxide
2% Sodium hypochlorite 5% phenol
Procedure Arrange the required materials on the lab
table.
Detection of Table Sugar in Milk Pour 10 ml of milk into the test tube labelled
“Table Sugar” and using a pipette add Concentrated HCl into the tube. This should
be done in the Fume Hood. Now shake the test tube gently so that the
milk gets precipitated. Weigh 100milli gram of Resorcinol and add
this to the precipitated milk. Then shake the test tube well. The colour of the milk
solution changes to light brown. Now place the test tube with the test tube
holder in a water bath at 1000C for 5 minutes. The colour of the milk solution turns red,
which shows the presence of table sugar in milk. If the colour remains the same it denotes
the absence of table sugar in milk.
Detection of starch Pour 3 ml milk in a test tube labelled “Starch”.
Now place the test tube with the test tube holder in a water bath at 100 C.
After 5 minutes remove the tube from the water bath and allow it to cool.
Using a dropper add 2-3 drops of Iodine solution to the test tube and shake it well.
If the colour of the milk solution turns yellow, it indicates the absence of starch. Dark blue
colour indicates the presence of starch in milk.
Detection of Benzoic Acid and Salicylic acid
Pour 5 ml milk from the beaker into the test tube labelled “Acid“.
Add few drops of conc. Sulphuric acid into the milk and shake the test tube gently. This
should be done in the Fume Hood. You will observe that the milk is getting
precipitated. Now, using a dropper add 0.5% ferric chloride solution drop by drop and
mix this well. A Buff colour indicates the presence of Benzoic
acid. If you observe a violet colour it shows the presence of salicylic acid in the milk.
Detection of Soap Pour 10 ml milk into a test tube labelled
“Soap”. Then add 10 ml hot water to the milk.
Add 1-2 drops of phenolphthalein indicator into the test tube and mix this gently.
If the colour turns pink, it indicates the presence of soap in the milk. If the colour
remains the same it shows the absence of soap in milk.
Detection of Formalin in milk Pour 2 ml milk into a test tube labelled “Formalin”.
To this add 2 ml of 90% sulphuric acid containing Ferric Chloride using a glass pipette. This
step should be done in the Fume Hood. A purple violet ring formed at the junction
indicates the presence of Formalin in the milk.
Detection of Ammonium sulphate in milk Pour 1 ml milk into a test tube labelled “Ammonium
Sulphate”. Pipette out 500 micro litre of 2% NaOH solution
and add this to the test tube. Discard the used tip and insert a new tip. Pipette out
500micro litre of 2% Sodium Hypochlorite and add this to the milk solution.
You will notice that the colour has turned light yellow.
Insert a fresh tip and add 500micro litre phenol solution and mix this well.
The milk solution turns light bluish colour. Keep this test tube in water bath at 100 C
for 20 Seconds. After 20 seconds the colour turns deep blue
indicating the presence of Ammonium sulphate. If the solution turns pink, it indicates the
absence of ammonium sulphate.
Detection of Micro-Organisms in milk Pour 10 ml milk from the beaker into the test
tube labelled “Micro-Organism”. Add 8-10 drops of methylene blue into the
test tube containing milk and mix the contents well. The colour of the milk solution turns
blue. Close the test tube using cotton ball and
keep it in the incubator for 30 minutes at 37 C.
If the blue coloured milk solution turns white immediately, it indicates a larger count of
micro-organism in the milk. If the colour remains the same, it indicates the presence
of fewer numbers of microorganisms in the sample.
the quality of milk. Soap, acid, starch, table sugar and chemicals like formalin are some
of the adulterants added to milk. Most of the chemicals used as adulterants are poisonous
and can cause health hazards. Here are some tests to find out some of the
common adulterants in milk. Materials Required
Milk Methylene blue
Test tubes Water bath
Concentrated HCl Resorcinol
Iodine solution Concentrated Sulphuric acid
0.5% Ferric Chloride solution Phenolphthalein indicator
Hot water 2% Sodium hydroxide
2% Sodium hypochlorite 5% phenol
Procedure Arrange the required materials on the lab
table.
Detection of Table Sugar in Milk Pour 10 ml of milk into the test tube labelled
“Table Sugar” and using a pipette add Concentrated HCl into the tube. This should
be done in the Fume Hood. Now shake the test tube gently so that the
milk gets precipitated. Weigh 100milli gram of Resorcinol and add
this to the precipitated milk. Then shake the test tube well. The colour of the milk
solution changes to light brown. Now place the test tube with the test tube
holder in a water bath at 1000C for 5 minutes. The colour of the milk solution turns red,
which shows the presence of table sugar in milk. If the colour remains the same it denotes
the absence of table sugar in milk.
Detection of starch Pour 3 ml milk in a test tube labelled “Starch”.
Now place the test tube with the test tube holder in a water bath at 100 C.
After 5 minutes remove the tube from the water bath and allow it to cool.
Using a dropper add 2-3 drops of Iodine solution to the test tube and shake it well.
If the colour of the milk solution turns yellow, it indicates the absence of starch. Dark blue
colour indicates the presence of starch in milk.
Detection of Benzoic Acid and Salicylic acid
Pour 5 ml milk from the beaker into the test tube labelled “Acid“.
Add few drops of conc. Sulphuric acid into the milk and shake the test tube gently. This
should be done in the Fume Hood. You will observe that the milk is getting
precipitated. Now, using a dropper add 0.5% ferric chloride solution drop by drop and
mix this well. A Buff colour indicates the presence of Benzoic
acid. If you observe a violet colour it shows the presence of salicylic acid in the milk.
Detection of Soap Pour 10 ml milk into a test tube labelled
“Soap”. Then add 10 ml hot water to the milk.
Add 1-2 drops of phenolphthalein indicator into the test tube and mix this gently.
If the colour turns pink, it indicates the presence of soap in the milk. If the colour
remains the same it shows the absence of soap in milk.
Detection of Formalin in milk Pour 2 ml milk into a test tube labelled “Formalin”.
To this add 2 ml of 90% sulphuric acid containing Ferric Chloride using a glass pipette. This
step should be done in the Fume Hood. A purple violet ring formed at the junction
indicates the presence of Formalin in the milk.
Detection of Ammonium sulphate in milk Pour 1 ml milk into a test tube labelled “Ammonium
Sulphate”. Pipette out 500 micro litre of 2% NaOH solution
and add this to the test tube. Discard the used tip and insert a new tip. Pipette out
500micro litre of 2% Sodium Hypochlorite and add this to the milk solution.
You will notice that the colour has turned light yellow.
Insert a fresh tip and add 500micro litre phenol solution and mix this well.
The milk solution turns light bluish colour. Keep this test tube in water bath at 100 C
for 20 Seconds. After 20 seconds the colour turns deep blue
indicating the presence of Ammonium sulphate. If the solution turns pink, it indicates the
absence of ammonium sulphate.
Detection of Micro-Organisms in milk Pour 10 ml milk from the beaker into the test
tube labelled “Micro-Organism”. Add 8-10 drops of methylene blue into the
test tube containing milk and mix the contents well. The colour of the milk solution turns
blue. Close the test tube using cotton ball and
keep it in the incubator for 30 minutes at 37 C.
If the blue coloured milk solution turns white immediately, it indicates a larger count of
micro-organism in the milk. If the colour remains the same, it indicates the presence
of fewer numbers of microorganisms in the sample.