YouSub
Untitled

en English

Untitled English subtitles

0 downloads · 48 lines · added Sep 25, 2015

Report a problem
What's wrong?
Advertisement

English transcript

MOTILITY DETERMINATION IN BACTERIA.
Objective of the experiment is to determine whether the given culture of microorganism
is motile or non motile. There are mainly 2 methods by which motility
determination can be done Hanging Drop method
Agar stabbing method Hanging Drop Method
Materials required for the exp: Depression Slide
Cover slip Petroleum Jelly
Bacterial culture Inoculation loop
Bunsen burner Sterile Needle
Procedure (All materials inside the LAF) Take a sterile needle
Apply petroleum jelly on four corners of the coverslip.
Take the Inoculation loop, flame it till red hot and allow to cool for sometime
Now with the sterilized loop, take a loopful of bacterial culture.
Place a small drop of the culture at the centre of the cover slip.
Take the depression slide and lower it, with the concavity facing down onto the cover slip
so that the drop protrudes into the center of the concavity of the slide .Then, press
gently to form a seal. Now invert the depression slide.
Observe the slide under low power objective and locate the edge of the drop.Then Switch
to high power objective to observe the motile organisms
Results: Actively motile microorganisms were observed under high power objective and was
fairly distinguishable from the microbes exhibiting Brownian movement.
Agar stabbing method Materials Required for the Exp:
SIM medium ( SULPHIDE INDOLE MOTILITY MEDIUM )
Bacterial culture Inoculation needle
Bunsen burner Procedure (All materials Inside LAF)
Take Inoculation needle Flame the I. Needle till red hot and then
allow to cool Now take the bacterial culture and remove
the cotton plug Flame the mouth of tube.
Insert the inoculating needle into the culture tube.
Again, flame the mouth of bacterial culture, close it and keep it back on the rack.
Now take the SIM medium , remove the cotton plug
Flame the mouth of the tube containing the medium.
With the I. Needle stab the medium vertically .Care should be taken not to touch the bottom
of the tube Flame the mouth of the tube and close it.
Flame the I. Needle again and keep it back on the rack
Incubate the tubes at 370C for 24 hours
After 24 hours, take out the tubes and the possible results are
Results : ----- H2S(+), Motile
The result shows dispersed growth of organism outward from the stab line, indicating that
the organism is actively motile. The black coloration in the medium is indicative of
sulfur reduction and hydrogen sulphide production by the motile organism
H2S(+), Non motile The result shows growth of organisms confined
to the stab line, indicating that the organism is non-motile. The black coloration in the
medium along the line of inoculation is indicative of sulfur reduction and hydrogen sulphide
production by the non-motile organism
H2S(-), motile The result shows dispersed growth of organisms
from the stab line, indicating that the organism is actively motile. The absence of black coloration
in the medium is indicative of the inability of the organism to reduce sulfur

Need subtitles from another video?