Advertisement
English transcript
Construction of maltose standard curve by DNS method
Maltose is a reducing disaccharide.
Maltose reduces the alkaline solution of 3,5 dinitro salicylic acid (DNS), which is pale
yellow, into an orange -red complex of 3-amino -5 nitro salicylic acid
Reagents: 3,5-dinitrosalicylic acid To get this dissolve
1 gm of DNS in 30 ml of distilled water, and add 30g of sodium potassium tartrate to it.
The solution turns milky yellow in colour. To this, add 20ml of 2N NaOH, this turns the
solution to a transparent orange yellow colour. The final volume is made up to 100ml by adding
distilled water.
Standard maltose solution: 1 mg/mL in distilled water.
Distilled water.
Procedure: Pipette out 0.2 to 1 mL of the standard maltose
solution into test tubes and make it up to the volume of 2.0mL with distilled water.
The first tube, with 2 mL of distilled water, serves as the blank
Add 1 mL of DNS-reagent to each tube. DSC02937, DSC02938, DSC02939
Keep all the tubes in a boiling water bath for exactly 5 minutes and then cool them to
room temperature. Add 4 mL of distilled water to each tube and
mix well. The intensity of the colour depends on the
concentration of maltose . Intensity change in colour is measured using
a colorimeter as the absorbance at 540nm wavelength
Now plot the graph with the amount of maltose along the x-axis and the optical density along
the y-axis. Result:
The maltose calibration curve is constructed as a straight line passing through the origin.
Maltose is a reducing disaccharide.
Maltose reduces the alkaline solution of 3,5 dinitro salicylic acid (DNS), which is pale
yellow, into an orange -red complex of 3-amino -5 nitro salicylic acid
Reagents: 3,5-dinitrosalicylic acid To get this dissolve
1 gm of DNS in 30 ml of distilled water, and add 30g of sodium potassium tartrate to it.
The solution turns milky yellow in colour. To this, add 20ml of 2N NaOH, this turns the
solution to a transparent orange yellow colour. The final volume is made up to 100ml by adding
distilled water.
Standard maltose solution: 1 mg/mL in distilled water.
Distilled water.
Procedure: Pipette out 0.2 to 1 mL of the standard maltose
solution into test tubes and make it up to the volume of 2.0mL with distilled water.
The first tube, with 2 mL of distilled water, serves as the blank
Add 1 mL of DNS-reagent to each tube. DSC02937, DSC02938, DSC02939
Keep all the tubes in a boiling water bath for exactly 5 minutes and then cool them to
room temperature. Add 4 mL of distilled water to each tube and
mix well. The intensity of the colour depends on the
concentration of maltose . Intensity change in colour is measured using
a colorimeter as the absorbance at 540nm wavelength
Now plot the graph with the amount of maltose along the x-axis and the optical density along
the y-axis. Result:
The maltose calibration curve is constructed as a straight line passing through the origin.