Advertisement
English transcript
Isoelectric precipitataion of Proteins : Casein from milk
Milk contains various types of proteins, with most of them in very small amounts. Traditionally
milk proteins were classified into caseins, whey proteins and minor proteins.
Casein is a group name for the dominant class of proteins in milk. It is responsible for
the white, opaque appearance of milk, as it combines with calcium and phosphorus to form
clusters of casein molecules, called micelles.- The isoelectric point of a protein (I.E.P.)
is the PH at which the molecule is electrically neutral (net charge is zero).
As most proteins show minimum solubility at their isoelectric point, this principle is
used to isolate casein by adjusting the PH of milk to (4.5-4.8) its isoelectric point.
As the PH of Milk is much higher than the isoelectric point of casein to precipitate
the casein dilute hydrochloric acid is added drop by drop to the milk, until the isoelectric
point is reached Apparatus:
100 ml milk, distilled water, 0.2N HCl, burette, magnetic stirrer, PH meter.
Procedure:
100 ml of milk is centrifuged at 4000 rpm for 20-25 minutes at room temperature.
To get the skimmed milk required for the procedure, remove the cream/fat that settles on the surface
of the milk carefully with the help of a spatula. Transfer the skimmed milk into a 500 ml glass
beaker. Add equal volume of water to the skimmed milk.
Now take a 50ml burette which will be used to add the HCl.
Place a magnetic stirrer on the burette stand. Put a magnetic bar into the beaker containing
the milk. Using the magnetic stirrer, stir well the
contents in the beaker. Take 0.2N HCL and pour it into the burette.
Now remove the electrode of the PH meter from the KCl solution.
Wash the electrode using distilled water as shown.
Wipe the electrode using a tissue paper as shown.
Dip the electrode into the beaker containing milk and check the pH.
The pH should be ~6.6. Now arrange the apparatus as shown.
While stirring the milk and add HCL drop by drop
Casein starts precipitating at a pH between 4.8 to 4.6
Wait till the precipitated casein settles down.
Filter out the Casein by pouring it through a funnel and a filter paper.
Wash the precipitated casein first with distilled water and then with ethanol and lastly with
diethyl ether. Now transfer the cakes of casein deposits
from the filter paper into a Petri plate. Allow the filtered casein to dry and then
check the weight. The weight of the same should be 3.5 gms.
Milk contains various types of proteins, with most of them in very small amounts. Traditionally
milk proteins were classified into caseins, whey proteins and minor proteins.
Casein is a group name for the dominant class of proteins in milk. It is responsible for
the white, opaque appearance of milk, as it combines with calcium and phosphorus to form
clusters of casein molecules, called micelles.- The isoelectric point of a protein (I.E.P.)
is the PH at which the molecule is electrically neutral (net charge is zero).
As most proteins show minimum solubility at their isoelectric point, this principle is
used to isolate casein by adjusting the PH of milk to (4.5-4.8) its isoelectric point.
As the PH of Milk is much higher than the isoelectric point of casein to precipitate
the casein dilute hydrochloric acid is added drop by drop to the milk, until the isoelectric
point is reached Apparatus:
100 ml milk, distilled water, 0.2N HCl, burette, magnetic stirrer, PH meter.
Procedure:
100 ml of milk is centrifuged at 4000 rpm for 20-25 minutes at room temperature.
To get the skimmed milk required for the procedure, remove the cream/fat that settles on the surface
of the milk carefully with the help of a spatula. Transfer the skimmed milk into a 500 ml glass
beaker. Add equal volume of water to the skimmed milk.
Now take a 50ml burette which will be used to add the HCl.
Place a magnetic stirrer on the burette stand. Put a magnetic bar into the beaker containing
the milk. Using the magnetic stirrer, stir well the
contents in the beaker. Take 0.2N HCL and pour it into the burette.
Now remove the electrode of the PH meter from the KCl solution.
Wash the electrode using distilled water as shown.
Wipe the electrode using a tissue paper as shown.
Dip the electrode into the beaker containing milk and check the pH.
The pH should be ~6.6. Now arrange the apparatus as shown.
While stirring the milk and add HCL drop by drop
Casein starts precipitating at a pH between 4.8 to 4.6
Wait till the precipitated casein settles down.
Filter out the Casein by pouring it through a funnel and a filter paper.
Wash the precipitated casein first with distilled water and then with ethanol and lastly with
diethyl ether. Now transfer the cakes of casein deposits
from the filter paper into a Petri plate. Allow the filtered casein to dry and then
check the weight. The weight of the same should be 3.5 gms.