Advertisement
English transcript
Qualitative Analysis of Amino Acids
Amino acids are critical to life. They have particularly important functions like being
the building blocks of proteins and being the intermediates in metabolism. Amino acids
are molecules containing an amino group, a carboxylic acid group and a side chain that
varies between different amino acids. Amino acids are generally amphoteric in nature.
The side chains of amino acids may contain additional groups that help to detect individual
amino acids. In the laboratory, the presence of an amino acid in a solution can be identified
by color, precipitation reaction or reactions with terminal group and their side chain radicals
groups. The general purpose of this experiment is to identify amino acids with a serious
of 10 chemical tests, namely: Ninhydrin test, Xanthoproteic acid test, Pauly’s Diazo test,
Millons test, Histidine test test, Hopkins cole test, Sakaguchi test , Lead sulphide
test, Folin’s McCarthy Sullivan test and Isatin test.
Materials Required:
Ninhydrin reagent, 40% sodium hydroxide, concentrated nitric acid, I N hydrochloric acid, sulphanilic
acid, sodium nitrite, sodium carbonate, Million’s reagent, sodium nitrate solution, bromine,
ammonium carbonate, acetic acid-glyoxilic acid reagent, concentrated sulphuric acid,
alpha naphthol reagent, hypobromite solution, urea solution, lead acetate solution, glycine
solution, 10% sodium nitroprusside solution, isatin reagent, test tubes, test tube holder,
water bath, spatula, droppers, marble chips, Bunsen burner, filter paper strip and icebox.
Procedure:
To carry out Ninhydrin Test, first transfer a few drops of unknown solution to a test
tube using a dropper. Now add a few drops of ninhydrin reagent to the same test tube.
Keep the test tube in a boiling water bath for 5 minutes. After 5 minutes, take the test
tube from the water bath. Now observe the colour of the solution. If the colour of the
solution is blue, it indicates the presence of alpha amino acids and if the colour of
solution is yellow, then it indicates the presences of imino acids.
To perform Xanthoproteic acid test, transfer 1 ml of unknown solution to a test tube using
a dropper. Add a few drops of concentrated nitric acid solution into this unknown solution
in a fume hood. Put some marble chips into this solution in the test tube to avoid bumping
of the solution while boiling. Then heat the solution containing test tube under the Bunsen
burner and cool it by placing under the running tap water. Now add a few drops of 40% NaOH
solution into this test tube containing solution. On adding 40% NaOH, the colour of the solution
changes to orange which indicates the presence of aromatic amino acids.
To do Pauly’s - Diazo test, first transfer a few drops of unknown sample to a test tube
and place it in a small ice bucket. Now take prechilled sulphanilic acid from the ice bucket
and add a few drops of sulphanilic acid to the same test tube. Similarly, add a few drops
of prechilled sodium nitrate to this test tube. This is followed by dropwise addition
of sodium carbonate solution. The appearance of red colour during the addition of sodum
carbonate solution indicates the presence of histidine and tyrosine.
To perform Hopkins Cole test, Add I ml of unknown solution in a test tube using a dropper.
Then add 1 ml of Acetic acid – Glyoxilic acid reagent to the same test tube containing
solution. Mix the solution by shaking it. Now, carefully add a few drops of concentrated
Sulphuric acid down the sides of the test tube containing solution. We can see that
purple-violet ring appears in the test tube indicating the presence of tryptophan.
To carry out Lead sulphide test, add 1 ml of unknown amino acid solution to a test tube
using a dropper. Now, add a few drops of NaOH solution to the same test tube containing
solution. Then put some marble chips into this solution in order to avoid the bumping
of the solution while heating. Now heat the solution under the Bunsen burner for 5-10
minutes using a test tube holder. After heating, keep the test tube under running tap water
to cool the contents. Now, add a few drops of 10% lead acetate solution into the test
tube containing solution. On observation, a black precipitate appears in the test tube
indicating the presence of Cysteine.
To do Isatin test, apply a drop of unknown amino acid solution on a filter paper strip
using a dropper and dry the spot using a hair dryer. Apply a drop of isatin reagent again
onto the dried spot. Then repeat the drying procedure for a few minutes. We can see a
blue coloured spot on the filter paper which indicates the presence of imino acid.
To perform Folins McCarthy Sullivan’s test, take 1ml of the unknown amino acid solution
in a test tube and add a few drops of 40% NaOH, followed by a few drops of glycine and
sodium nitroprusside solution. Now place the test tube in a hot water bath, maintained
at 40°C, for 15 minutes. Add 0.5ml of 6N HCl into this test tube taken from water bath.
On adding HCl, the content of the test tube changes to red colour indicating the presence
of Methionine.
To carry out Sackaguchi test, transfer a few drops of prechilled unknown amino acid to
a test tube using a dropper. Add a few drops of 40% NaOH , alpha- Naphthol solution, 5%
urea, hypobromite solution respectively to this same test tube containing solution. The
color of the solution in the test tube changes to red indicating the presence of arginine.
To perform Histidine test, transfer 2 ml of unknown amino acid solution to a test tube
using a dropper. Add a few drops of 5% Bromine in 33% acetic acid solution into this test
tube containing solution. Keep the test tube at room temperature for 10 minutes. Then add
2ml of Ammonium carbonate solution to this test tube and keep the test tube in boiling
water bath for 5 minutes. After 5 minutes, we can see that colour of the solution in
the test tube changes to blue. This indicates the presence of Histidine.
To do Millon’s test, transfer 1ml of Amino acid solution to a test tube using a dropper.
Add a few drops of Millons reagent and mix the solution by shaking it. Now heat the test
tube under the Bunsen burner for 3-5 minutes and cool it under tap water. Carefully add
a few drops of concentrated nitric acid solution into this test tube. We can see that the colour
of the solution in the test tube changes to red which indicates the presence of tyrosine.
Amino acids are critical to life. They have particularly important functions like being
the building blocks of proteins and being the intermediates in metabolism. Amino acids
are molecules containing an amino group, a carboxylic acid group and a side chain that
varies between different amino acids. Amino acids are generally amphoteric in nature.
The side chains of amino acids may contain additional groups that help to detect individual
amino acids. In the laboratory, the presence of an amino acid in a solution can be identified
by color, precipitation reaction or reactions with terminal group and their side chain radicals
groups. The general purpose of this experiment is to identify amino acids with a serious
of 10 chemical tests, namely: Ninhydrin test, Xanthoproteic acid test, Pauly’s Diazo test,
Millons test, Histidine test test, Hopkins cole test, Sakaguchi test , Lead sulphide
test, Folin’s McCarthy Sullivan test and Isatin test.
Materials Required:
Ninhydrin reagent, 40% sodium hydroxide, concentrated nitric acid, I N hydrochloric acid, sulphanilic
acid, sodium nitrite, sodium carbonate, Million’s reagent, sodium nitrate solution, bromine,
ammonium carbonate, acetic acid-glyoxilic acid reagent, concentrated sulphuric acid,
alpha naphthol reagent, hypobromite solution, urea solution, lead acetate solution, glycine
solution, 10% sodium nitroprusside solution, isatin reagent, test tubes, test tube holder,
water bath, spatula, droppers, marble chips, Bunsen burner, filter paper strip and icebox.
Procedure:
To carry out Ninhydrin Test, first transfer a few drops of unknown solution to a test
tube using a dropper. Now add a few drops of ninhydrin reagent to the same test tube.
Keep the test tube in a boiling water bath for 5 minutes. After 5 minutes, take the test
tube from the water bath. Now observe the colour of the solution. If the colour of the
solution is blue, it indicates the presence of alpha amino acids and if the colour of
solution is yellow, then it indicates the presences of imino acids.
To perform Xanthoproteic acid test, transfer 1 ml of unknown solution to a test tube using
a dropper. Add a few drops of concentrated nitric acid solution into this unknown solution
in a fume hood. Put some marble chips into this solution in the test tube to avoid bumping
of the solution while boiling. Then heat the solution containing test tube under the Bunsen
burner and cool it by placing under the running tap water. Now add a few drops of 40% NaOH
solution into this test tube containing solution. On adding 40% NaOH, the colour of the solution
changes to orange which indicates the presence of aromatic amino acids.
To do Pauly’s - Diazo test, first transfer a few drops of unknown sample to a test tube
and place it in a small ice bucket. Now take prechilled sulphanilic acid from the ice bucket
and add a few drops of sulphanilic acid to the same test tube. Similarly, add a few drops
of prechilled sodium nitrate to this test tube. This is followed by dropwise addition
of sodium carbonate solution. The appearance of red colour during the addition of sodum
carbonate solution indicates the presence of histidine and tyrosine.
To perform Hopkins Cole test, Add I ml of unknown solution in a test tube using a dropper.
Then add 1 ml of Acetic acid – Glyoxilic acid reagent to the same test tube containing
solution. Mix the solution by shaking it. Now, carefully add a few drops of concentrated
Sulphuric acid down the sides of the test tube containing solution. We can see that
purple-violet ring appears in the test tube indicating the presence of tryptophan.
To carry out Lead sulphide test, add 1 ml of unknown amino acid solution to a test tube
using a dropper. Now, add a few drops of NaOH solution to the same test tube containing
solution. Then put some marble chips into this solution in order to avoid the bumping
of the solution while heating. Now heat the solution under the Bunsen burner for 5-10
minutes using a test tube holder. After heating, keep the test tube under running tap water
to cool the contents. Now, add a few drops of 10% lead acetate solution into the test
tube containing solution. On observation, a black precipitate appears in the test tube
indicating the presence of Cysteine.
To do Isatin test, apply a drop of unknown amino acid solution on a filter paper strip
using a dropper and dry the spot using a hair dryer. Apply a drop of isatin reagent again
onto the dried spot. Then repeat the drying procedure for a few minutes. We can see a
blue coloured spot on the filter paper which indicates the presence of imino acid.
To perform Folins McCarthy Sullivan’s test, take 1ml of the unknown amino acid solution
in a test tube and add a few drops of 40% NaOH, followed by a few drops of glycine and
sodium nitroprusside solution. Now place the test tube in a hot water bath, maintained
at 40°C, for 15 minutes. Add 0.5ml of 6N HCl into this test tube taken from water bath.
On adding HCl, the content of the test tube changes to red colour indicating the presence
of Methionine.
To carry out Sackaguchi test, transfer a few drops of prechilled unknown amino acid to
a test tube using a dropper. Add a few drops of 40% NaOH , alpha- Naphthol solution, 5%
urea, hypobromite solution respectively to this same test tube containing solution. The
color of the solution in the test tube changes to red indicating the presence of arginine.
To perform Histidine test, transfer 2 ml of unknown amino acid solution to a test tube
using a dropper. Add a few drops of 5% Bromine in 33% acetic acid solution into this test
tube containing solution. Keep the test tube at room temperature for 10 minutes. Then add
2ml of Ammonium carbonate solution to this test tube and keep the test tube in boiling
water bath for 5 minutes. After 5 minutes, we can see that colour of the solution in
the test tube changes to blue. This indicates the presence of Histidine.
To do Millon’s test, transfer 1ml of Amino acid solution to a test tube using a dropper.
Add a few drops of Millons reagent and mix the solution by shaking it. Now heat the test
tube under the Bunsen burner for 3-5 minutes and cool it under tap water. Carefully add
a few drops of concentrated nitric acid solution into this test tube. We can see that the colour
of the solution in the test tube changes to red which indicates the presence of tyrosine.