YouSub
Untitled

en English

Untitled English subtitles

0 downloads · 878 lines · added Oct 24, 2015

Report a problem
What's wrong?
Advertisement

English transcript

The following content is provided under a Creative
Commons license.
Your support will help MIT OpenCourseWare continue to
offer high-quality educational resources for free.
To make a donation or view additional material from
hundreds the MIT courses, visit MIT OpenCourseWare at
ocw.mit.edu.
PROFESSOR BAWENDI: Last time you talked about the first law
of thermodynamics.
And you talked about isothermal expansion, the
Joule expansion.
You saw a very important result. which is that for an
ideal gas, the energy content is only dependent on the
temperature, nothing else.
Not the volume, not the pressure, it just cares about
the temperature.
So, if you have an isothermal process for an ideal gas, the
energy doesn't change. q plus w is equal to zero for any
isothermal process.
And you also saw that du then could be written as Cv dT for
an ideal gas always.
This is not generally true.
If you have a real gas and you write du is Cv dT, and your
path is not a constant volume path, then you
are making a mistake.
But for an ideal gas, you can always write this.
And this turns out to be very useful to remember.
OK, now most processes that we deal with are not constant
volume processes.
So energy, which has this wonderful property here, du is
Cv dt for constant volume process, which happens to be
equal to d q, constant volume, because there's no change.
there's no work if you've got a constant volume process.
So du here is a very interesting quantity, because
it's related to the heat that's going in or out of the
system under constant volume process.
But as I said, we're not operating usually in a
constant volume environment.
When I flail my arms around I generate work and heat.
This is not a constant volume process.
If I'm the system, what's constant when I do this?
Anybody have an idea?
What's the one function of state?
I'm the system, the rest are the surrounding.
What's the one function of state that's constant when I'm
doing all my chemical reactions to
move my arms around?
Temperature?
STUDENT: Pressure?
PROFESSOR BAWENDI: Pressure, right.
Pressure is constant.
What is the pressure at?
One atmosphere, one bar.
So the most interesting processes are the processes
where pressure is constant.
When I had have a vial on bench top, and I do a chemical
reaction in the vial, and it's open to the atmosphere, the
pressure is constant at one atmosphere.
When you've got your cells growing in your petri dish,
the pressure is constant at one atmosphere, even if
they're evolving gas, pressure is constant.
So we'd really like to be able to find some sort of equation
of state, or some sort of rather function of state
that's going to relate the heat going in or out of the
system with that function of state, because this isn't
going to do it. du only relates to the heat under
constant volume.
And the heat is a really important thing to know.
How much heat do you need to put into a system, or how much
heat is going to come out of a system when something is
happening in the system?
All right, this is a really important quantity to know.
Your boiling water or whatever, you want to know how
much heat do you need to boil that amount of water under
constant pressure?
And this is where enthalpy comes in.
You've all heard of enthalpy.
H we're going to write it as the function of temperature
and pressure.
And the reason enthalpy was invented was exactly for that
reason, because we need some way to figure out how to
relate the heat coming in or out of a system under a
constant pressure process.
Because it's so important.
And I should add and also under reversible work, where
the external pressure is equal to the internal pressure.
OK, so we're going to define enthalpy as u + pV, these are
all functions of state here, So H is a function of state,
and we're going to see now how this is, indeed, related to
the heat flow in and out of the system.
If you have a constant pressure,
reversible work process.
Let's take a system.
Under constant pressure T1, V1, going to a second -- this
is the system, so let me write the system here.
And it's more dramatic if the system is a gas, p, T2, V2,
And let's look at what happens to these functions of state,
to H to u under this transformation.
OK, so let's look at delta u.
Delta u is q plus w.
That's the first law.
And this is a constant pressure path, so now I can
write, this q is actually q under constant pressure.
Little p means the path is a constant pressure path.
And I'm doing reversible work.
So that w is minus p, dV where p is the pressure inside the
system, minus p delta V. Rearrange that, delta u is
plus p delta V is equal to q p.
All right, so this is the heat flowing in or out of the
system, and these are all functions of state.
This depends on the path.
It tells you right here, the path is constant pressure.
These don't depend on the path, right.
V doesn't care how you get there. u doesn't
care how you get there.
In this case, p is a constant because the path is constant.
So we can bring the p inside, delta u plus
delta p V it's q p.
Take this delta outside again, delta of u plus p V
is equal to q p.
And there you have it.
There is the H right there.
The u plus p V. Delta H is equal to q V.
And this is the reason why enthalpy was invented, and why
it's so important.
Because we want to know this.
So this for a finite change.
If you want to have an infinitestimally small change,
you end up writing dh is dq sub p.
It's not always equal to the heat.
It's only equal to the heat if your process is constant
pressure reversible work.
OK, so this is the kind of, this is the kind of concept
that needs to be branded into your brain, so that if I come
into your bedroom in the middle of the night and I
whisper to you delta H, you know, you should wake up and
say q p, right?
Heat under constant pressure reversible work.
This should become second nature.
This is where the intuition comes from.
This is why people right tables and
tables of delta H's.
Why you have delta H's from all these reactions, because
this is basically the heat, and the heat is something we
can measure, we can control.
We can figure out how much heat is going
in and out of something.
This is what we're interested in.
OK, so last time you looked at -- any
questions on this first?
Yes.
STUDENT: [INAUDIBLE] from the T delta V to the delta p here?
What was the reasoning behind that?
PROFESSOR BAWENDI: p is constant here.
It's constant pressure.
OK, so now, last time you looked at the Joule expansion
to teach you how to relate derivatives like du/dV.
du/dV under constant temperature. du/dT under
constant volume.
You use the Joule expansion to find these quantities.
Now these quantities were useful because you could
relate them.
The slope of changes, with respect to volume or
temperature of the energy with respect to quantities that you
understood, that you could measure.
We're going to do the same thing here.
So if we take as our natural variables for enthalpy to be
temperature and pressure, and we have some sort of change in
enthalpy, dH, and it's going to be related to changes in
temperature and pressure through the derivatives dH
through the slope of the enthalpy in the T direction,
keeping pressure constant, dT plus the slope of enthalpy in
the pressure direction, keeping the temperature
constant, dp, and these are knobs that we can turn.
We can change of temperature.
We can change the pressure.
These are physical knobs that are available to us as
experimentalists.
And so when we turn these knobs on our system, we want
to know how the enthalpy is changing for that system.
Because eventually they will tell us maybe things about how
heat is changing further on.
OK, but in order to relate turning these physical knob to
this quantity here, which we don't have a very good feel
for, we've got to have a feel for the slopes.
If I keep the pressure constant.
I change the temperature, what does that mean?
What is dh/dT?
If I keep the temperature constant, and just change the
pressure, dH is going to change, but how
is it going to change?
What does this mean in terms of something I can physically
understand?
That's the program now for the next few minutes.
What are these quantities?
What is dH/dT as a function, keeping pressure constant,
what is dH/dp, keeping temperature constant?
All right, let's start with the first one, dH/dT, keeping
the pressure constant.
And we're going to look at a reversible process to help us
out, but the result is going to be independent of whether
or not we have a reversible process or
irreversible process.
Constant pressure, that means dp is equal to zero.
So for reversible process, constant
pressure, what do we know?
This is already branded in your brain, right?
Reversible process, constant pressure dH=dq.
So we can write that down, dH=dq, constant pressure.
That's by definition of enthalpy.
That's why we created enthalpy.
What else do we know?
Well we can go look up here, looking at the differential,
there are no approximations here.
This is just an equality.
I have a constant pressure process.
This term here is equal to zero.
That means that dH is also equal to dH/dT, constant
pressure dT.
All right, so now I've got more dH/dT under constant
pressure. dH is equal to this, and it's also equal to this.
All right, these two are equal to each other.
Now, I know how to relate the heat flow to temperature
change, through the heat capacity. dq constant pressure
is that heat capacity, and I have to tell you the path for
the heat capacity.
So it's C sub p, the heat capacity under a constant
pressure path, dT, all right?
So these two are equal to each other.
So, these two are equal to each other as well, which
tells me that this derivative, dH/dT constant pressure is Cp.
So now I have my first of my two slopes, in terms of
something that's related to my system, the heat capacity of
the system.
Something I can measure and I can tabulate, and when I turn
my dT knob here I know what's going to
happen to the enthalpy.
So this is the first, this is the one.
So it's very similar to what we saw with the volume and the
energy, where du/dV under constant temperature was equal
to Cv in this case here, right. and you're going to
find that there's a lot of these analogies between energy
and enthalpy.
You just change volume to pressure and basically you're
looking at enthalpy under a constant -- anything that's
done at a constant volume path with energy, there's the same
thing happening under constant pressure path for enthalpy.
So you can guess the answer usually that way.
OK, so now we have the other one, dH/dp constant
temperature.
How do we relate this to something physical?
Well, it's going to be an experiment, very much like the
Joule experiment.
The Joule experiment was a constant
energy experiment, right.
Here we're going to have to find a constant enthalpy
experiment, and that is going to be the Joule-Thomson
experiment.
That's going to extract out a physical meaning to this
derivative here.
OK, the Joule-Thomson experiment.
This is going to get us dH/dp constant temperature.
What is this experiment?
You take a throttle valve, which consists of some sort of
porous plug between two cylinders that is insulated.
There is insulation here.
Insulation on the bottom.
It's like a, think about a tube, a large tube, insulated
tube, with a bunch of -- a frit inside here, which
prevents flow of gas, which slows down the flow of gas
from one side to the other.
It's a blockage in this tube here.
Then you put two pistons, one on that side here, and one on
this side here, and the external pressure here, we're
going to call that p1.
The external pressure here, we're going to call that p2,
and we're going to do it slowly enough that the
pressure on this side of the cylinder is in equilibrium
with the external pressure, and the pressure on this side
of the cylinder is in
equilibrium with this pressure.
But not so slowly that these two are in equilibrium with
each other.
So this is restricting the flow, so there's
some sweet spot here.
When I'm pushing slowly enough here that the pressure here is
equal to that one, but not so slowly that the air flow from
here to here is fast, compared to how fast I'm pushing.
You got the picture here?
Any questions on that?
All right, then as I push through, I'm going to start
with all of my gas on this side, and at the end, I'm
going to have all the gas on the other side.
Let me first ask you this, is this a reversible or in
irreversible process?
Right, let me add one more piece of data here which I
said in words, but which is actually important to write
down before doing the problem.
Is this a reverse -- any guesses?
How many people vote for that this is a reversible process?
I've got one vote back there, two votes,
three votes, four votes.
Anybody else?
How many people think this is irreversible?
It's about a tie, and everybody else doesn't now.
All right, I'm going to give you ten seconds, fifteen
seconds to make up your mind.
You're not allowed to be on the fence here.
You've got to decide, all right?
This is, you can talk to your neighbors, you know, do a
little bit of thinking.
And I'm going to give you ten seconds to figure this out,
what your vote is for that.
All right, let's try again.
How many people vote that this is reversible?
That looks like a majority to me.
Irreversible?
Let's look at the show of hands?
All right, so this is the majority here.
Good thing physics doesn't work on the rule of the
majority, otherwise we'd be in big trouble.
Wow, let's walk through that.
I'm sorry to say that this is the wrong answer.
OK, why is that the wrong answer?
Well, just think, you know, think about it.
You're pushing through here. p1 is greater than p2.
What does it mean for a process to be in equilibrium
or reversible?
It means at any point you can reverse the direction of time,
and it will look fine, right.
So now I'm pushing on this plug here, with p1
greater than p2.
I'm pushing, I'm pushing, I'm pushing. p1 is
greater than p2.
Then I want to reverse direction of time.
I want the arrow of time to go so that the gas goes from p2
to p1. p2 is less than p1.
Is that going to work out?
If p2, the pressure in p2, is less than the pressure in p1,
is the gas going to want to go from p2 to p1 and the whole
thing reverse back?
You've got to put more pressure on one side than the
other if you want to push that gas through
the throttle, right?
So this is where the time scale issue comes into play.
I said let's do this slowly enough that this p1 is in
equilibrium with this p1, but not so slowly that this
pressure is equivalent to that pressure.
If I do it really, really slowly, so that everything is
reversible, well I won't be able to do it, because p1 and
p2 are different.
But suppose that I fix my pistons here, with p1 greater
than p2, and I don't touch it, eventually p1
will be equal to p2.
I'll come to some sort of equilibrium.
So this is a system which is out of equilibrium.
If I stop, if I move slowly, if I move more slowly, then
these two will want equilibrium.
So this is an irreversible process.
The Joule-Thomson experiment is irreversible.
OK, important -- if you are part of this group here, think
about it and make sure you understand that.
All right, so this is the experiment.
Now what are we doing with that?
The initial state, let's look at what we are doing.
So initially, we're going to have our piston, there's the
plug sitting here.
Our piston on the right side here fully out, and the piston
on my right side, your left side, fully inside.
There's no gas on that side here.
So there's p2 sitting here.
There is p1 sitting here, and all of the gas is sitting on
that side of the plug.
Then after we're done with the experiment, we'll have
transferred all of the gas from one side to the other. p1
here. p2 sitting here.
And there's going to be some volume V2 and some volume V1,
but are not necessarily the same.
Especially since the pressures are different. we don't know
yet about temperature so I don't know what to say about
these volumes because I don't know what the temperatures'
are going to do.
OK, so let's go through this and see what we would do which
is to calculate the heat and the work.
This is well insulated.
So, what is the -- let's do the first one here.
What's q for this process here?
Anybody?
STUDENT Zero.
PROFESSOR BAWENDI: Zero, right.
This is an adiabatic process.
It's well insulated.
Heat is not going in or out, adiabatic. q is equal to zero.
So all we need to find out is the work now.
Let's divide it up into the two sides, the work going on
on the left hand side, my left hand side or your left hand
side, and the work going on on the right hand side.
So let's first look at the left hand side.
OK, so w, first of all, work is being done to the system on
the left hand side here.
I'm pressing on the gas.
So I expect that to be a positive number.
The pressure is constant, p.
The V goes from V1 to zero.
So we write down p1, V1.
On the right hand side, the work, let's call this left
hand side, let's call this right hand side.
Here there's an expansion going on, so the system is
doing work to the external world.
This piston is being brought out, so we expect the work to
be negative, negative.
And we start out with zero volume.
We end up with a volume of V2, and the external pressure is
constant to p2.
Minus p2, V2.
Minus p delta V. So the total work is the work from the left
hand side plus the work on the right hand side, which is p1
V1 minus p2 V2.
Which I can rewrite as minus delta pV.
Delta pV is p2 V2 minus p1 V1.
It's the pressure volume multiplied together at the
final state, minus pressure volume from the initial state,
with the minus sign here because it's
the negative of that.
All right, what is delta u? delta u is q plus w. q is
zero. delta u is just w.
So this is also just delta u. delta u is minus delta pV, for
the process.
OK, delta H is delta of u plus pV.
By definition, that's how we define enthalpy up here.
H is u plus pV.
Delta H is delta of u plus pV, which is equal to delta u,
plus delta pV.
Now delta u is minus delta pV.
So I have minus delta pV plus delta pV.
This is equal to zero.
So this irreversible process, this Joule-Thomson process, is
a constant enthalpy process.
Delta h for this process is equal to zero.
Adiabatic q equal to zero.
It's also delta H which is zero.
The two didn't necessarily follow, because remember,
delta H is dq so p is only true for a reversible constant
pressure process.
This is an irreversible process.
So a priori, this was not necessarily true.
It turns out after you do all the math, it turns out to be
delta H equals zero.
All right, so this is the experiment.
How do we go from that experiment to the terms that
we're trying to get, these slopes.
Remember, we're trying to get delta H, we're trying to get
dH/dT constant pressure and dH/dp constant temperature.
OK, these are the two things were trying to get here.
OK, so let's write down, what we know here.
I'm missing something.
Oh, we already know one thing.
We already know this guy here.
We already did that.
OK, dH/dT constant pressure is Cp.
That was easy one.
So we already know that.
So now we can write or differential dH as Cp dT plus
dH/dp, constant temperature, dp.
Now we want to find out what this guy is here.
Now for this experiment, this is a constant enthalpy
experiment for the Joule-Thomson experiment, this
is equal to zero.
So I can rearrange this to get this dH/dp in terms of things
that I can either measure, like the heat capacity, or
that I have control of, like dT and dp.
So in this case, dH/dp constant temperature is minus
Cp dT/dp, and this is under constant temperature, no, not
constant temperature.
Whatever the experi -- for that the experiment is.
For that experiment, the constraint, so we need a
constraint here, right, we need a constraint here.
Right?
We need a constraint here.
The constraint isn't constant temperature because the
temperature is going to be changing.
It's not constant pressure, beca
…

Need subtitles from another video?