Advertisement
English (United Kingdom) transcript
Hello and welcome to the long awaited FL Studio 12
Complete Basic Tutorial
I am Nathaniel Fisher
And I'd like to firstly begin
by apologising for the low quality
and poor organisation
in the original FLStudio Complete Basic Tutorial
That was nearly three years ago now
and with the release of FLStudio 12
One of the biggest updates
to FL Studio in quite a while
I would like to take the time
to provide you with the tutorial that I
originally aimed to create
armed with a greater knowledge
of both music production
and the FL Studio interface
I'd like to say thank you for all of you kind comments
in the original tutorial
and also for the helpful advice
Despite the fact that arguably the tutorial
was successful, I really do think it was
very, very low standard-
very poor quality.
But with that, I think it's time
to move on with the tutorial
In this tutorial I will be covering
Navigating the application
Basic pattern creation
Adding your own plugins to the program
and creating very convenient
shortcuts to opening them
Automation
and mastering.
Basically, arming you with the knowledge
of how to create simple tracks
in FL Studio
So with that,
lets begin.
So, FL Studio 12
for me, has two really good selling points
over previous versions of the application
the first one is the Vectorial Interface
what this means, is that
these aren't images, that make up the
interface
These are mathematically calculated
shapes
Meaning that these can be
on massive screens
as long as the resolution is high enough
giving you lots of room
to work
The second selling point
is the implementation of a driver
called FL Studio ASIO
now ASIO is a driver
that allows for near zero latency
input
which is fantastic for live performing
and also for recording directly from a MIDI Keyboard
such as this one
into the application with maximum accuracy
FL Studio ASIO is the first driver
that not only allows for near zero latency
audio processing
it doesn't lock the audio device to one application
So I'd like to show you
how to utilise this driver
Now I believe it will startup with the
Primary sound driver
Now let me show you the difference
So that's with the primary sound driver
Now we can reduce this
But if we reduce it too far, and
a lot of tracks are playing at once
These things called underruns happen
Now these underruns, cause crackles
in the audio, artefacts
that can be really quite annoying
and can reduce the accuracy of what
you're actually hearing
with regards to the final track
Going below this number
a lot of the plugins break
instantly
Now with ASIO
which I cant switch to because it will
break my recording
It allows for that near zero latency
But, it locks it to FL Studio only
Meaning I can't record
So all you have to do
to take advantage of this
is go to FL Studio ASIO
and click show ASIO panel
It will be set to 512 initially
but if your CPU is good enough
you can turn it right down to 256
meaning only 6ms
Now of course plugins add to that
But this initial number
is a good 70 milliseconds less than with
the default audio driver
Make sure you select the correct
Microphone for any recording that you want to do
And make sure that you select the correct output
But it's that simple to setup
the near zero latency driver
If you don't mind a few artefacts
and want less latency
you can turn off Triple Buffer
as you can see, that's taken off 6 milliseconds
But basically, the more complex
your project is, the more you'll have to turn up
this value
But first try using Triple Buffer
Because that adds a minimal amount of latency
and can fix a lot of issues
I'm going to leave this unchecked for now
because I want the least latency possible
So that's how to set up FL Studio ASIO
Something that I think is brilliant
It's a really good advancement by Image-Line
Now that that's set up
I'd like to talk to you about the interface
And I'm going to make some more room here
by just adjusting the width of this browser
which gives me more room for the other
windows, which automatically resize
based on their snap locations
So now that we've got a fully open project
I'd like to rewind a little bit
and go to an empty project
This is what you'll likely see once you purchase
FL Studio
So let's go on that assumption
So the first thing that you want to do
is, if you don't have a MIDI device such as this one
then you can just click a button on your keyboard
Just to see that the sound's working
If you see feedback here
At the top center of the screen
But you can't hear anything
Then you might want to check your
Output device
And also ensure that the volume is at a
suitable level
But once you've got that working
You could start constructing a very basic track
Simply by clicking on these buttons here
So, now
Every one that's glowing, or bright
will cause the sound to be triggered
You can right click
to disable them
An easy way to fill in these
Is to right click the channel
in the pattern
window
and simply do "Fill each two steps"
That saves you a lot of work
But to be honest with you
those sounds are OK
Just to practice with, but they're not very
good in terms of
professional sound
So all you have to do to remove these is to
Right click them and click delete
And I tend to do this
You don't really have to
But it just cleans things up a little bit
Hold left click to add
Hold right click to remove
Quite simple
So what I'm going to do is I'm going to choose from
the plugin presets here
A generator
A generator creates a sound
An effect modifies an existing sound
So we're gonna go ahead with a generator
and choose a simple
Preset
Which is the default 3x Oscillator
All you have to do to add this to your project
Is to drag it from the left-hand side
Explorer window (browser)
And you can override an existing channel
Or just drop it underneath
Or above
To create a new channel
I'm gonna override the kick
Now, with FL Studio 12
Much of the default plugins that come with FL Studio
have been revamped
Their interface is very very clean
And very sharp indeed
For the purpose of this tutorial
I'm gonna go ahead and use my keyboard
For any generation that I do
But you can make do with a normal computer keyboard
For the time being
So here you get a simple sine wave
Three of them, it looks like
That's panning, as is shown by the symbol there
So, as you can see, the interface is quite simple to use
This means square
This is- looks like sine and square
Triangle
Saw
Quite harsh
And... noise- Very interesting
So yeah, its quite easy to start
producing things
As you can see up here
Pattern 1 would suggest the first pattern
the first collection of notes
So, all we have to do
to actually put this into your project
is to drop it here
If you hold control, and move the scrollwheel
up you'll find that there's actually some notes
You can delve deeper by double-clicking the pattern
And it will open it
This button switches between song and pattern mode
Highlighted, or glowing means it's in pattern mode
Which really doesn't do anything right now
And if you click it again, it goes to song mode
It's important to notice the difference between
these two windows
This is just one element of a song
And this is the entire composition
How did I do that?
The same way I did it in this window up here
Left clicking
As you can see, it loops so you can listen to things
over and over again with ease
To adjust the length of a note
All you have to do is click the end
And drag it left or right
You'll notice that the next note you place is the same length
as the last one
So the program adapts to you being able to duplicate
things
It's not called Fruity Loops for nothing
You can resize any of the windows simply by clicking
and dragging their borders
So, this is a simple way to create your first
pattern in FL Studio
It's important to have as much control as possible
over the notes you make
Because how loud they are
Can be just as important
as what note they are
I'll give you an example here
By speeding up the pattern
I selected all three of these notes
using a box select which is
Possible to do by holding CTRL on the keyboard
And then just dragging the area that you want to select
I can reduce the size of all the notes
By clicking on any of the notes that are selected
And it will reduce all the others accordingly
This even works with different sized notes
What I'm going to do in this case though
Is I'm gonna use this button
This button scales the entire pattern (that is selected)
Which is really really useful and not only does it
change their length but it also changes their position
Snapping is really useful in this case
But if you want to override it
All you have to do when you try and resize a note
Is hold ALT
And then you can adjust it by any amount you want
While I've selected the object
I just hold shift
Click any of the notes that are selected
And drag wherever I want
It's not locked to the same note
I can increase their "height"
If I let go of shift
I'm using space to start and stop the pattern
I'm using the same techniques here to build
up by pattern even further
And you can copy and paste as many times as you want
As you can see, the pattern
automatically lengthens
If you want to undo more than one step
You can't just press CTRL +Z because it will keep reverting
between undo and redo
In order to undo multiple times, hold CTRL + ALT
And as you can see I've gone through multiple undo levels
Velocity is really important
Velocity is also known as volume
The only real use of the term velocity
is with regards to MIDI input
MIDI input has 127 levels of velocity
That's based on computer limitations
But as you can see, this defines the velocity of a note
I'll show you what this does
Once I've modified all of the notes
Now that is super important with drums
As you can see, once I've held CTRL + ALT + Z
It opens the current project history
Now the current project is interesting
because it shows you everything that you're using
Currently I'm using the Fruity Limiter
In the mixer
This tells you a lot of the information you need
So, as I'm hovering over these
Feel free to take a look at what is being displayed
Now I called this the song view, if you like
But it's technically known as the playlist
As you can see, even the shortcut keys are displayed
To the right hand side of that panel I just indicated
All you have to do to toggle these
Is to click them
Once they are opened, they will appear ontop
of any other window
As can be seen by this
Now, I've shown you the channel rack
The playlist, and the piano roll
The piano roll you can get to know as the patterns
One thing I haven't shown you, is the mixer
Now the mixer has been revamped in FL 12
You have multiple different ways to view it
This gives you the most large display
But it's good to be compact
If you're on any less than
two monitors, or a 4K display
Now, the mixer is great
It's very adaptable
In terms of display
But I want you to see the indication at this point
this highlighted green part when I press a key
As you can see,
That one is being triggered
This one is the master channel
This means that everything goes through the master
Any effects you apply to the master channel
Apply to all the different channels
All the sounds have it, for example
If I applied a reverb to it, my entire song
would have a reverb, not just the drum
So this isn't good, because this means that right now
I can only control my one instrument
through the master
Well, it's easy to resolve that
All you have to do is make sure that
the channel of your choice is selected
And right click the mixer channel that you want to
assign it to
Go to channel routing
And click "Route Selected Channel To This Track"
As you can see, the shortcut is CTRL + L
So now when I press
Not only does it go through the master
Because as I said previously, everything goes through the
master
But it also goes through
"Channel 1"
of the mixer
This means that I can apply effects to this
without affecting the rest of the instruments in my song
I'll give you an example here
So, with FL12 the different effects have been categorised
So it gives you a bit more context about what they do
If we go to "Filter" here
for example
And click Effector
This is a great versatile effect module
As you can see, it's not doing anything right now
This is because bypass is on
Turn off bypass and it will actually be registered
As you can see, as it's on reverb
There is a nice clean long reverb
So the two different axis
define the decay, and the size of the reverb
It would seem that the Y parameter
defines the size
And the X parameter
Defines the decay, or how wet the reverb is
Now, I want to prove to you that this is only
affecting the first channel
So what I'm gonna go ahead and do
Is I'm gonna click this button here
And instead of going to the plugin database
I'm going to go to a snap that I created myself
It was originally called Snap 5
As indicated by the number
But I renamed it to "Gen. External"
Which means, Generators, External (Generators)
Plugins that are not native to FL Studio
Now technically FPC is
But it is a little bit difficult to access
So I've decided to put it here
I'm gonna go ahead and drag this in
FPC is great because it allows you to
drag samples onto each of the pads here
And you have maximum control over the sound of your drums
I'm gonna go ahead and leave this
As it is but I want you to note
The channels that are being triggered
When I press a note
As you can see, Master is being triggered
But there is no reverb
Now, multiple channels can actually be assigned to
To the same mixer track
As can be demonstrated by doing the same thing
I've already said
But we don't want that, so we're gonna go ahead and
change that
Don't worry about the fact that I routed it to
this one first
Once you route it to another one,
it will be disassociated from the first one
As you can see
I'm gonna go ahead and apply a soundgoodizer
If we click this to make sure it's open
A is the lowest frequencies
Which is good, it's bass
D, in contrast, is treble
Doesn't sound very good
Now, it's important to not overuse it
I usually keep it around here
So now we have our drum with a bass boost
on it
And we have our oscillator
Now we want to put these two together
What I don't want to do
is start editing the piano roll of the drum
In the same pattern
Because this means that we can't mix and match
as we choose
Instead what we're going to do
Is click the plus button
Next to the pattern
And give it a name that's suitable
In this case I'm not going to, but you can do if you want
You can skip that
Simply by pressing enter
And it will remain as pattern 2
As you can see, I'm now just by clicking
While I've got Pattern 2 selected
I've now created the pattern here which is currently empty
I want to work on Pattern 2
But I don't want to listen to the rest of the song
While I do
So all I have to do is click
This button to make sure I'm in Pattern Mode
It's at this point in the game
Where I'm thinking "What kind of song
do I want to create?"
Now, one of the most defining factors
About this is the tempo
Different genres tend to have different tempo ranges
Electro tends to be pretty much always 128 beats per minute
Dubstep can be between 140-150 BPM
Drum and bass can be between 150 and 170 BPM
Metal can be 170 BPM plus
Orchestral can be as low as 60 BPM
There is a massive range
And luckily FL Studio allows you to change that here
So, I'm gonna go ahead and say I want to create an electro dance track
So I'm gonna go to 128 BPM
I want to make sure that that sounds right
So I'm gonna use the metronome
The metronome is great because if I was to record something
And there was a lot going on
Or if I don't trust my own instinct to
how large the interval is per beat
For a 128 BPM song for example
The metronome kind of gives me a bit of guidance there
Now I could do this same thing that I did with the
original pattern
Which was to place the notes manually
But instead I think I want to record
So all we do is press the record button
Now for recording the keyboard its just
The easiest thing to do is just to click "everything"
So when I press play it should give me a countdown
I wanna make sure I've got the right tracks here
The right notes to press
There's a basic pattern
When I press stop the pattern appears
Now, I must admit even though I did have the metronome
My rhythm is not the best
So as you can see, it's not really with the lines
of the track
Luckily there's an easy feature to do this
If you want to do a few notes, box select them first
But if not, without selecting any
and instead just press CTRL + Q
To quantize the notes
This constrains them
To the beats or intervals of the BPM
Which is really helpful, and it allows you to clean up any sloppy mistakes
Now, it's not complete perfect though
I was so off tempo at the end,
That this has quantized the wrong values
Which you can see very clearly because that shouldn't be there
Should be here
As you can see, every other note
Starts on a big bold line
As should this one
So now if you press play
If we turn off record mode
Now as you've noticed, well I hope you have anyway
The pattern 2, which is the drums
Has updated, it's got larger
And it's got lots of notes in it.
Now, all I have to do to hear them both together
Is to untick this, and press play
Alternatively, you should just be able to click
anywhere in the playlist
Which makes things a little bit easier
It's not exactly going to be number one
But, I think it's a good start
OK, so we've got the basic patterns down
But I want to change the sound of my sounds over time
How do I do that?
Well, it's quite simple really
As you can see here, we've got the
Mixer, and this is where you apply effects
Generators make a sound,
Effects change the sound
Now I'm gonna change what this effector does
I'm going to turn it onto filter
I'm gonna go ahead and press the pattern button
And I'm gonna navigate
to pattern one
By clicking this
and dragging it up or down, to select the pattern that I want
Now I'm on the right pattern,
I'm gonna take a listen at what the filter sounds like
I'm also gonna turn off the metronome
So I'm gonna pick a position that I think sounds good
For the start
About there
And now, all I have to do because this is a native plugin
To change it over time,
Is to right click the knob that I want to change over time
And create Automation Clip
I'm gonna do the same for the Y parameter aswell
As you can see, some tracks have been created
underneath our existing patterns
I'm gonna switch to song mode right now
So that I can hear how my sound changes over time
And over time, I'm going to make these
about 50%, which is displayed
in the same notification area
As I've showed you previously
Now I'm gonna change the curve of these
Just by clicking this middle controller here
And then start making my song a little bit longer now
I can either copy these, just by doing that
Or I can extend them just like I would with a note
Make them look roughly identical
Now, you might want to start controlling these patterns a bit more
You might want to create a very similar pattern, but not
know what the exact values were for example
And it's really easy to do this
Say, for example, I wanted to take this part, and loop this part
But not this introductory part
All I would do is, use the slice tool
Which is available just by clicking this
Or by pressing "C"
And I'll take this pattern here
Of these automations
And just cut them both in half
Now, this is quite good for duplicating this part alone
But if I change this part
Then the other part changes too
Now that could be a good thing,
But in this case, I don't think it is a good thing
I'm not a big fan of that
I want this one to be different to that one
But I want it to be based on that one to begin with
which is why I copied it
To do this all you have to do is click "Make Unique"
And now if you change this pattern, which is why
I'm gonna make this
In line with the other end, so it doesn't sound quite
as jarring when it switches back again
As you can see, it doesn't change this one over h
…
Complete Basic Tutorial
I am Nathaniel Fisher
And I'd like to firstly begin
by apologising for the low quality
and poor organisation
in the original FLStudio Complete Basic Tutorial
That was nearly three years ago now
and with the release of FLStudio 12
One of the biggest updates
to FL Studio in quite a while
I would like to take the time
to provide you with the tutorial that I
originally aimed to create
armed with a greater knowledge
of both music production
and the FL Studio interface
I'd like to say thank you for all of you kind comments
in the original tutorial
and also for the helpful advice
Despite the fact that arguably the tutorial
was successful, I really do think it was
very, very low standard-
very poor quality.
But with that, I think it's time
to move on with the tutorial
In this tutorial I will be covering
Navigating the application
Basic pattern creation
Adding your own plugins to the program
and creating very convenient
shortcuts to opening them
Automation
and mastering.
Basically, arming you with the knowledge
of how to create simple tracks
in FL Studio
So with that,
lets begin.
So, FL Studio 12
for me, has two really good selling points
over previous versions of the application
the first one is the Vectorial Interface
what this means, is that
these aren't images, that make up the
interface
These are mathematically calculated
shapes
Meaning that these can be
on massive screens
as long as the resolution is high enough
giving you lots of room
to work
The second selling point
is the implementation of a driver
called FL Studio ASIO
now ASIO is a driver
that allows for near zero latency
input
which is fantastic for live performing
and also for recording directly from a MIDI Keyboard
such as this one
into the application with maximum accuracy
FL Studio ASIO is the first driver
that not only allows for near zero latency
audio processing
it doesn't lock the audio device to one application
So I'd like to show you
how to utilise this driver
Now I believe it will startup with the
Primary sound driver
Now let me show you the difference
So that's with the primary sound driver
Now we can reduce this
But if we reduce it too far, and
a lot of tracks are playing at once
These things called underruns happen
Now these underruns, cause crackles
in the audio, artefacts
that can be really quite annoying
and can reduce the accuracy of what
you're actually hearing
with regards to the final track
Going below this number
a lot of the plugins break
instantly
Now with ASIO
which I cant switch to because it will
break my recording
It allows for that near zero latency
But, it locks it to FL Studio only
Meaning I can't record
So all you have to do
to take advantage of this
is go to FL Studio ASIO
and click show ASIO panel
It will be set to 512 initially
but if your CPU is good enough
you can turn it right down to 256
meaning only 6ms
Now of course plugins add to that
But this initial number
is a good 70 milliseconds less than with
the default audio driver
Make sure you select the correct
Microphone for any recording that you want to do
And make sure that you select the correct output
But it's that simple to setup
the near zero latency driver
If you don't mind a few artefacts
and want less latency
you can turn off Triple Buffer
as you can see, that's taken off 6 milliseconds
But basically, the more complex
your project is, the more you'll have to turn up
this value
But first try using Triple Buffer
Because that adds a minimal amount of latency
and can fix a lot of issues
I'm going to leave this unchecked for now
because I want the least latency possible
So that's how to set up FL Studio ASIO
Something that I think is brilliant
It's a really good advancement by Image-Line
Now that that's set up
I'd like to talk to you about the interface
And I'm going to make some more room here
by just adjusting the width of this browser
which gives me more room for the other
windows, which automatically resize
based on their snap locations
So now that we've got a fully open project
I'd like to rewind a little bit
and go to an empty project
This is what you'll likely see once you purchase
FL Studio
So let's go on that assumption
So the first thing that you want to do
is, if you don't have a MIDI device such as this one
then you can just click a button on your keyboard
Just to see that the sound's working
If you see feedback here
At the top center of the screen
But you can't hear anything
Then you might want to check your
Output device
And also ensure that the volume is at a
suitable level
But once you've got that working
You could start constructing a very basic track
Simply by clicking on these buttons here
So, now
Every one that's glowing, or bright
will cause the sound to be triggered
You can right click
to disable them
An easy way to fill in these
Is to right click the channel
in the pattern
window
and simply do "Fill each two steps"
That saves you a lot of work
But to be honest with you
those sounds are OK
Just to practice with, but they're not very
good in terms of
professional sound
So all you have to do to remove these is to
Right click them and click delete
And I tend to do this
You don't really have to
But it just cleans things up a little bit
Hold left click to add
Hold right click to remove
Quite simple
So what I'm going to do is I'm going to choose from
the plugin presets here
A generator
A generator creates a sound
An effect modifies an existing sound
So we're gonna go ahead with a generator
and choose a simple
Preset
Which is the default 3x Oscillator
All you have to do to add this to your project
Is to drag it from the left-hand side
Explorer window (browser)
And you can override an existing channel
Or just drop it underneath
Or above
To create a new channel
I'm gonna override the kick
Now, with FL Studio 12
Much of the default plugins that come with FL Studio
have been revamped
Their interface is very very clean
And very sharp indeed
For the purpose of this tutorial
I'm gonna go ahead and use my keyboard
For any generation that I do
But you can make do with a normal computer keyboard
For the time being
So here you get a simple sine wave
Three of them, it looks like
That's panning, as is shown by the symbol there
So, as you can see, the interface is quite simple to use
This means square
This is- looks like sine and square
Triangle
Saw
Quite harsh
And... noise- Very interesting
So yeah, its quite easy to start
producing things
As you can see up here
Pattern 1 would suggest the first pattern
the first collection of notes
So, all we have to do
to actually put this into your project
is to drop it here
If you hold control, and move the scrollwheel
up you'll find that there's actually some notes
You can delve deeper by double-clicking the pattern
And it will open it
This button switches between song and pattern mode
Highlighted, or glowing means it's in pattern mode
Which really doesn't do anything right now
And if you click it again, it goes to song mode
It's important to notice the difference between
these two windows
This is just one element of a song
And this is the entire composition
How did I do that?
The same way I did it in this window up here
Left clicking
As you can see, it loops so you can listen to things
over and over again with ease
To adjust the length of a note
All you have to do is click the end
And drag it left or right
You'll notice that the next note you place is the same length
as the last one
So the program adapts to you being able to duplicate
things
It's not called Fruity Loops for nothing
You can resize any of the windows simply by clicking
and dragging their borders
So, this is a simple way to create your first
pattern in FL Studio
It's important to have as much control as possible
over the notes you make
Because how loud they are
Can be just as important
as what note they are
I'll give you an example here
By speeding up the pattern
I selected all three of these notes
using a box select which is
Possible to do by holding CTRL on the keyboard
And then just dragging the area that you want to select
I can reduce the size of all the notes
By clicking on any of the notes that are selected
And it will reduce all the others accordingly
This even works with different sized notes
What I'm going to do in this case though
Is I'm gonna use this button
This button scales the entire pattern (that is selected)
Which is really really useful and not only does it
change their length but it also changes their position
Snapping is really useful in this case
But if you want to override it
All you have to do when you try and resize a note
Is hold ALT
And then you can adjust it by any amount you want
While I've selected the object
I just hold shift
Click any of the notes that are selected
And drag wherever I want
It's not locked to the same note
I can increase their "height"
If I let go of shift
I'm using space to start and stop the pattern
I'm using the same techniques here to build
up by pattern even further
And you can copy and paste as many times as you want
As you can see, the pattern
automatically lengthens
If you want to undo more than one step
You can't just press CTRL +Z because it will keep reverting
between undo and redo
In order to undo multiple times, hold CTRL + ALT
And as you can see I've gone through multiple undo levels
Velocity is really important
Velocity is also known as volume
The only real use of the term velocity
is with regards to MIDI input
MIDI input has 127 levels of velocity
That's based on computer limitations
But as you can see, this defines the velocity of a note
I'll show you what this does
Once I've modified all of the notes
Now that is super important with drums
As you can see, once I've held CTRL + ALT + Z
It opens the current project history
Now the current project is interesting
because it shows you everything that you're using
Currently I'm using the Fruity Limiter
In the mixer
This tells you a lot of the information you need
So, as I'm hovering over these
Feel free to take a look at what is being displayed
Now I called this the song view, if you like
But it's technically known as the playlist
As you can see, even the shortcut keys are displayed
To the right hand side of that panel I just indicated
All you have to do to toggle these
Is to click them
Once they are opened, they will appear ontop
of any other window
As can be seen by this
Now, I've shown you the channel rack
The playlist, and the piano roll
The piano roll you can get to know as the patterns
One thing I haven't shown you, is the mixer
Now the mixer has been revamped in FL 12
You have multiple different ways to view it
This gives you the most large display
But it's good to be compact
If you're on any less than
two monitors, or a 4K display
Now, the mixer is great
It's very adaptable
In terms of display
But I want you to see the indication at this point
this highlighted green part when I press a key
As you can see,
That one is being triggered
This one is the master channel
This means that everything goes through the master
Any effects you apply to the master channel
Apply to all the different channels
All the sounds have it, for example
If I applied a reverb to it, my entire song
would have a reverb, not just the drum
So this isn't good, because this means that right now
I can only control my one instrument
through the master
Well, it's easy to resolve that
All you have to do is make sure that
the channel of your choice is selected
And right click the mixer channel that you want to
assign it to
Go to channel routing
And click "Route Selected Channel To This Track"
As you can see, the shortcut is CTRL + L
So now when I press
Not only does it go through the master
Because as I said previously, everything goes through the
master
But it also goes through
"Channel 1"
of the mixer
This means that I can apply effects to this
without affecting the rest of the instruments in my song
I'll give you an example here
So, with FL12 the different effects have been categorised
So it gives you a bit more context about what they do
If we go to "Filter" here
for example
And click Effector
This is a great versatile effect module
As you can see, it's not doing anything right now
This is because bypass is on
Turn off bypass and it will actually be registered
As you can see, as it's on reverb
There is a nice clean long reverb
So the two different axis
define the decay, and the size of the reverb
It would seem that the Y parameter
defines the size
And the X parameter
Defines the decay, or how wet the reverb is
Now, I want to prove to you that this is only
affecting the first channel
So what I'm gonna go ahead and do
Is I'm gonna click this button here
And instead of going to the plugin database
I'm going to go to a snap that I created myself
It was originally called Snap 5
As indicated by the number
But I renamed it to "Gen. External"
Which means, Generators, External (Generators)
Plugins that are not native to FL Studio
Now technically FPC is
But it is a little bit difficult to access
So I've decided to put it here
I'm gonna go ahead and drag this in
FPC is great because it allows you to
drag samples onto each of the pads here
And you have maximum control over the sound of your drums
I'm gonna go ahead and leave this
As it is but I want you to note
The channels that are being triggered
When I press a note
As you can see, Master is being triggered
But there is no reverb
Now, multiple channels can actually be assigned to
To the same mixer track
As can be demonstrated by doing the same thing
I've already said
But we don't want that, so we're gonna go ahead and
change that
Don't worry about the fact that I routed it to
this one first
Once you route it to another one,
it will be disassociated from the first one
As you can see
I'm gonna go ahead and apply a soundgoodizer
If we click this to make sure it's open
A is the lowest frequencies
Which is good, it's bass
D, in contrast, is treble
Doesn't sound very good
Now, it's important to not overuse it
I usually keep it around here
So now we have our drum with a bass boost
on it
And we have our oscillator
Now we want to put these two together
What I don't want to do
is start editing the piano roll of the drum
In the same pattern
Because this means that we can't mix and match
as we choose
Instead what we're going to do
Is click the plus button
Next to the pattern
And give it a name that's suitable
In this case I'm not going to, but you can do if you want
You can skip that
Simply by pressing enter
And it will remain as pattern 2
As you can see, I'm now just by clicking
While I've got Pattern 2 selected
I've now created the pattern here which is currently empty
I want to work on Pattern 2
But I don't want to listen to the rest of the song
While I do
So all I have to do is click
This button to make sure I'm in Pattern Mode
It's at this point in the game
Where I'm thinking "What kind of song
do I want to create?"
Now, one of the most defining factors
About this is the tempo
Different genres tend to have different tempo ranges
Electro tends to be pretty much always 128 beats per minute
Dubstep can be between 140-150 BPM
Drum and bass can be between 150 and 170 BPM
Metal can be 170 BPM plus
Orchestral can be as low as 60 BPM
There is a massive range
And luckily FL Studio allows you to change that here
So, I'm gonna go ahead and say I want to create an electro dance track
So I'm gonna go to 128 BPM
I want to make sure that that sounds right
So I'm gonna use the metronome
The metronome is great because if I was to record something
And there was a lot going on
Or if I don't trust my own instinct to
how large the interval is per beat
For a 128 BPM song for example
The metronome kind of gives me a bit of guidance there
Now I could do this same thing that I did with the
original pattern
Which was to place the notes manually
But instead I think I want to record
So all we do is press the record button
Now for recording the keyboard its just
The easiest thing to do is just to click "everything"
So when I press play it should give me a countdown
I wanna make sure I've got the right tracks here
The right notes to press
There's a basic pattern
When I press stop the pattern appears
Now, I must admit even though I did have the metronome
My rhythm is not the best
So as you can see, it's not really with the lines
of the track
Luckily there's an easy feature to do this
If you want to do a few notes, box select them first
But if not, without selecting any
and instead just press CTRL + Q
To quantize the notes
This constrains them
To the beats or intervals of the BPM
Which is really helpful, and it allows you to clean up any sloppy mistakes
Now, it's not complete perfect though
I was so off tempo at the end,
That this has quantized the wrong values
Which you can see very clearly because that shouldn't be there
Should be here
As you can see, every other note
Starts on a big bold line
As should this one
So now if you press play
If we turn off record mode
Now as you've noticed, well I hope you have anyway
The pattern 2, which is the drums
Has updated, it's got larger
And it's got lots of notes in it.
Now, all I have to do to hear them both together
Is to untick this, and press play
Alternatively, you should just be able to click
anywhere in the playlist
Which makes things a little bit easier
It's not exactly going to be number one
But, I think it's a good start
OK, so we've got the basic patterns down
But I want to change the sound of my sounds over time
How do I do that?
Well, it's quite simple really
As you can see here, we've got the
Mixer, and this is where you apply effects
Generators make a sound,
Effects change the sound
Now I'm gonna change what this effector does
I'm going to turn it onto filter
I'm gonna go ahead and press the pattern button
And I'm gonna navigate
to pattern one
By clicking this
and dragging it up or down, to select the pattern that I want
Now I'm on the right pattern,
I'm gonna take a listen at what the filter sounds like
I'm also gonna turn off the metronome
So I'm gonna pick a position that I think sounds good
For the start
About there
And now, all I have to do because this is a native plugin
To change it over time,
Is to right click the knob that I want to change over time
And create Automation Clip
I'm gonna do the same for the Y parameter aswell
As you can see, some tracks have been created
underneath our existing patterns
I'm gonna switch to song mode right now
So that I can hear how my sound changes over time
And over time, I'm going to make these
about 50%, which is displayed
in the same notification area
As I've showed you previously
Now I'm gonna change the curve of these
Just by clicking this middle controller here
And then start making my song a little bit longer now
I can either copy these, just by doing that
Or I can extend them just like I would with a note
Make them look roughly identical
Now, you might want to start controlling these patterns a bit more
You might want to create a very similar pattern, but not
know what the exact values were for example
And it's really easy to do this
Say, for example, I wanted to take this part, and loop this part
But not this introductory part
All I would do is, use the slice tool
Which is available just by clicking this
Or by pressing "C"
And I'll take this pattern here
Of these automations
And just cut them both in half
Now, this is quite good for duplicating this part alone
But if I change this part
Then the other part changes too
Now that could be a good thing,
But in this case, I don't think it is a good thing
I'm not a big fan of that
I want this one to be different to that one
But I want it to be based on that one to begin with
which is why I copied it
To do this all you have to do is click "Make Unique"
And now if you change this pattern, which is why
I'm gonna make this
In line with the other end, so it doesn't sound quite
as jarring when it switches back again
As you can see, it doesn't change this one over h
…