Advertisement
English transcript
3D printing is so cool. As the technology gets cheaper and better, it won’t cost an
arm and leg, but it certainly could make one!
Hey guys Julia here for DNews
3D printing technology is getting crazier by the day, from ballgowns, to bicycles, to
instruments, seems like anything can be printed out of plastic. One of the best things to
come from this technology is it’s ability to improve the design of artificial limbs.
We’ve talked before on DNews about how 3D printed limbs could help people. But what
about animals?
Oh yes here’s some adorable ways 3D printing has saved animals.
Derby the dog can play fetch with his best friends thanks to 3D printed legs. You see
this particular pooch was born with deformed front legs. His foster mom rescued him from
a shelter and refused to let his disability define him. He first got fitted with a cute
little cart which supported his upper body, but unfortunately limited his movement, he
had to stick to sidewalks and he couldn’t use stairs.
3D Systems, a company based out of South Carolina designed artificial legs for Derby. But unlike
a cart system, these prosthetics are designed for running! They look like the blades paralympic
athletes might wear. Now this lucky dog can frolic through the grass with the best of
them.
And 3D printing is for the birds too! Tieta, a female tucan lost a huge chunk of her beak
while being trafficked in Rio de Janeiro. Leaving her unable to eat properly or fend
for herself, she could only eat by throwing food into the air trying to catch it. Which
didn’t work so well. Only about a third of the time.
Thankfully she was rescued. In a team effort between a wildlife management group Instituto
Vida Livre and three Brazilian universities, Tieta got a new lease on life. The team used
a deceased bird’s beak as a model to design a new one for Tieta. In just two hours of
printing and 40 minutes of surgery she was almost as good as new.
It’s a light beak, weighing only 4g. It’s basically a small 3D printed plastic piece
that’s then, covered with nail polish and sealed with a special polymer made from the
castor oil plant. She’s still unfortunately not fit enough to survive in the wild, but
she’s a lot better than she was! Now she can eat normally and even use her beak to
clean herself.
Beauty the Bald Eagle lost the top of her beak thanks to a shot from a poacher. Left
to die in Alaska, she was rescued by raptor biologist Janie (Fink) Veltkamp. While some
birds can regrow their beaks, experts didn’t think hers would, and many recommended the
bird be euthanized. But Veltkamp wasn’t ready to give up hope yet. In a fateful meeting
with engineer Nate Calvin, the two hatched a plan to help get Beauty a new beak.
Thanks to a volunteer team of specialists, Beauty was fitted with a 3D printed upper
beak in 2008. She could feed herself and preen and just be a big happy bird. But in the past
7 years, her natural beak has partially regrown! While it’s still not at it’s original
shape and size, she can now eat salmon all by herself without the prosthetic.
Probably my favorite though is the story of Winter. Nearly ten years ago a young dolphin
was found caught up in a crab fishing net. Suffering extensive damage to her tail, it
had to be amputated. For two years she depended on her human caretakers for nearly everything.
But a great team of handlers and scientists came together design her a new tail in 2007.
Since then a movie WITH MORGAN FREEMAN was made about her story. She lives at the Clearwater
Marine Aquarium in Clearwater, Fla. where she continues to inspire millions today.
It doesn’t take an expert to help an animal in need. Stumpy the turtle lost her leg due
to infection. But rather than let her spend her remaining years hobbling around, a group
of six elementary students in Savannah Georgia had a better idea. After being inspired by
another lucky turtle with a lego prosthetic, the students designed a ball caster like leg
that attaches to her shell. A design which can help her easily move in any direction.
Using their school’s 3D printer, and a little help from their teacher, they helped Stumpy
be not so stumpy anymore, maybe she should be called Rolly.
While most of these are heart warming stories, 3D printing is insanely awesome. Not only
does the technology enable a faster, cheaper, and easier way to make things, it allows for
custom designs. A game changer for prosthetics. It can be super expensive if prosthetics wear
out and break and need a replacement part. Now a new part can be printed in a number
of hours! And as the technology gets easier and more affordable, now almost anyone can
help an animal in need.
You know what else makes us feel all warm and fuzzy about the future?
Intel creates the breakthrough technologies that make amazing experiences possible.
Having Intel inside makes for better experiences outside. Intel drives innovation with products
like processors, wearables and IOT devices, and
within data centers. In the PC and beyond.
So what do you think the coolest thing ever printed was? have you ever used one? tell
us about it in the comments below
arm and leg, but it certainly could make one!
Hey guys Julia here for DNews
3D printing technology is getting crazier by the day, from ballgowns, to bicycles, to
instruments, seems like anything can be printed out of plastic. One of the best things to
come from this technology is it’s ability to improve the design of artificial limbs.
We’ve talked before on DNews about how 3D printed limbs could help people. But what
about animals?
Oh yes here’s some adorable ways 3D printing has saved animals.
Derby the dog can play fetch with his best friends thanks to 3D printed legs. You see
this particular pooch was born with deformed front legs. His foster mom rescued him from
a shelter and refused to let his disability define him. He first got fitted with a cute
little cart which supported his upper body, but unfortunately limited his movement, he
had to stick to sidewalks and he couldn’t use stairs.
3D Systems, a company based out of South Carolina designed artificial legs for Derby. But unlike
a cart system, these prosthetics are designed for running! They look like the blades paralympic
athletes might wear. Now this lucky dog can frolic through the grass with the best of
them.
And 3D printing is for the birds too! Tieta, a female tucan lost a huge chunk of her beak
while being trafficked in Rio de Janeiro. Leaving her unable to eat properly or fend
for herself, she could only eat by throwing food into the air trying to catch it. Which
didn’t work so well. Only about a third of the time.
Thankfully she was rescued. In a team effort between a wildlife management group Instituto
Vida Livre and three Brazilian universities, Tieta got a new lease on life. The team used
a deceased bird’s beak as a model to design a new one for Tieta. In just two hours of
printing and 40 minutes of surgery she was almost as good as new.
It’s a light beak, weighing only 4g. It’s basically a small 3D printed plastic piece
that’s then, covered with nail polish and sealed with a special polymer made from the
castor oil plant. She’s still unfortunately not fit enough to survive in the wild, but
she’s a lot better than she was! Now she can eat normally and even use her beak to
clean herself.
Beauty the Bald Eagle lost the top of her beak thanks to a shot from a poacher. Left
to die in Alaska, she was rescued by raptor biologist Janie (Fink) Veltkamp. While some
birds can regrow their beaks, experts didn’t think hers would, and many recommended the
bird be euthanized. But Veltkamp wasn’t ready to give up hope yet. In a fateful meeting
with engineer Nate Calvin, the two hatched a plan to help get Beauty a new beak.
Thanks to a volunteer team of specialists, Beauty was fitted with a 3D printed upper
beak in 2008. She could feed herself and preen and just be a big happy bird. But in the past
7 years, her natural beak has partially regrown! While it’s still not at it’s original
shape and size, she can now eat salmon all by herself without the prosthetic.
Probably my favorite though is the story of Winter. Nearly ten years ago a young dolphin
was found caught up in a crab fishing net. Suffering extensive damage to her tail, it
had to be amputated. For two years she depended on her human caretakers for nearly everything.
But a great team of handlers and scientists came together design her a new tail in 2007.
Since then a movie WITH MORGAN FREEMAN was made about her story. She lives at the Clearwater
Marine Aquarium in Clearwater, Fla. where she continues to inspire millions today.
It doesn’t take an expert to help an animal in need. Stumpy the turtle lost her leg due
to infection. But rather than let her spend her remaining years hobbling around, a group
of six elementary students in Savannah Georgia had a better idea. After being inspired by
another lucky turtle with a lego prosthetic, the students designed a ball caster like leg
that attaches to her shell. A design which can help her easily move in any direction.
Using their school’s 3D printer, and a little help from their teacher, they helped Stumpy
be not so stumpy anymore, maybe she should be called Rolly.
While most of these are heart warming stories, 3D printing is insanely awesome. Not only
does the technology enable a faster, cheaper, and easier way to make things, it allows for
custom designs. A game changer for prosthetics. It can be super expensive if prosthetics wear
out and break and need a replacement part. Now a new part can be printed in a number
of hours! And as the technology gets easier and more affordable, now almost anyone can
help an animal in need.
You know what else makes us feel all warm and fuzzy about the future?
Intel creates the breakthrough technologies that make amazing experiences possible.
Having Intel inside makes for better experiences outside. Intel drives innovation with products
like processors, wearables and IOT devices, and
within data centers. In the PC and beyond.
So what do you think the coolest thing ever printed was? have you ever used one? tell
us about it in the comments below