Advertisement
English transcript
This episode of DNews is brought to you by the all-new G Flex 2, from LG. Life’s Good
Water repellent metals? Yup, that’s a thing now.
Hi gang, Amy here for DNews. We’ve all seen corroded metals, whether it’s the wall of
an abandoned building or an old pipe that’s sprung a leak. Metals corrode because we use
them in environments where they are chemically unstable; only copper and the precious metals
like gold, silver, and platinum, exist in nature in their metallic state. More common
metals like iron are processed from minerals and unstable, particularly in the presence
of water.
Preventing corrosion usually means adding a chemical coating to a metal’s surface,
making it hydrophobic.
At CES 2015, Belgium-based Europlasma, a global leader in low pressure plasma technology,
showcased its nanocoating technology for the electronics industry. The Nanofics coating
makes any electronics highly water and oil repellant.
The problem with any kind of hydrophobic coatings that they can wear off.
But we might not need these kinds of chemical coatings much longer. Two scientists from
the University of Rochester recently led a team that developed a laser-patterning technique
that makes metal hydrophobic without the need for any kind of coating. They’ve also used
the same technique to make metals absorbent, metals that can pull water along uphill on
a surface.
It all comes down to the pattern lasered onto the metal. By creating an intricate pattern
of micro- and nanoscale structures on the metal’s surface using ultra-short powerful
bursts, structures that become an intrinsic part of the metal, giving it completely new
qualities. This process can make an ordinary metal a multifunctional surface that repels
water and absorbs light.
This process makes the surface so resistant to water that droplets actually bounce along
the surface. It’s actually more slippery than teflon! A drop of water would roll off
this lasered metal if you tilt it to just 5 degrees.
This kind of resurfacing could have widespread applications. Metal surfaced in this way could
prevent rust and corrosion and simplify issues of anti-icing. In developing countries, super
hydrophobic materials could make rainwater collection far more efficient and create toilet
facilities that are far more sanitary. In parts of the world lacking clean water and
healthcare, these would be significant applications.
But we’re unfortunately a ways from that happening. It currently takes an hour to pattern
a 1 inch by 1 inch metal. The process will need to develop before it can be applied to
large structures like toilet facilities. Still, it’s pretty exciting.
What do you guys think? How cool is it that we can change the surface properties of a
metal with lasers!?
Let us know in the comments below or you can ask me on Twitter as @astVintageSpace. And
don’t forget to subscribe for more DNews every day of the week.
Water repellent metals? Yup, that’s a thing now.
Hi gang, Amy here for DNews. We’ve all seen corroded metals, whether it’s the wall of
an abandoned building or an old pipe that’s sprung a leak. Metals corrode because we use
them in environments where they are chemically unstable; only copper and the precious metals
like gold, silver, and platinum, exist in nature in their metallic state. More common
metals like iron are processed from minerals and unstable, particularly in the presence
of water.
Preventing corrosion usually means adding a chemical coating to a metal’s surface,
making it hydrophobic.
At CES 2015, Belgium-based Europlasma, a global leader in low pressure plasma technology,
showcased its nanocoating technology for the electronics industry. The Nanofics coating
makes any electronics highly water and oil repellant.
The problem with any kind of hydrophobic coatings that they can wear off.
But we might not need these kinds of chemical coatings much longer. Two scientists from
the University of Rochester recently led a team that developed a laser-patterning technique
that makes metal hydrophobic without the need for any kind of coating. They’ve also used
the same technique to make metals absorbent, metals that can pull water along uphill on
a surface.
It all comes down to the pattern lasered onto the metal. By creating an intricate pattern
of micro- and nanoscale structures on the metal’s surface using ultra-short powerful
bursts, structures that become an intrinsic part of the metal, giving it completely new
qualities. This process can make an ordinary metal a multifunctional surface that repels
water and absorbs light.
This process makes the surface so resistant to water that droplets actually bounce along
the surface. It’s actually more slippery than teflon! A drop of water would roll off
this lasered metal if you tilt it to just 5 degrees.
This kind of resurfacing could have widespread applications. Metal surfaced in this way could
prevent rust and corrosion and simplify issues of anti-icing. In developing countries, super
hydrophobic materials could make rainwater collection far more efficient and create toilet
facilities that are far more sanitary. In parts of the world lacking clean water and
healthcare, these would be significant applications.
But we’re unfortunately a ways from that happening. It currently takes an hour to pattern
a 1 inch by 1 inch metal. The process will need to develop before it can be applied to
large structures like toilet facilities. Still, it’s pretty exciting.
What do you guys think? How cool is it that we can change the surface properties of a
metal with lasers!?
Let us know in the comments below or you can ask me on Twitter as @astVintageSpace. And
don’t forget to subscribe for more DNews every day of the week.